User manual
14
PART 1 • English
7.3.2 DB Management (save your channel settings on an USB-Storage-Device and load it anytime back)
This menu allows you to up/download the channel Data Base of your receiver from/to an USB-Device.
This very convenient feature enables you to save your personal settings like Channel-, Favourite-, Sat- and
TP-lists on an USB Storage Device and upload them later back to the receiver. This could be done e.g.
after unintentional changes or Factory Reset. In such a case just skip the whole First Installation and new
adjusting procedures by pressing EXIT in First Installation and select the DB management menu.
Connect the USB Storage Device to you receiver and select one of the options:
7.3.2.1 Load from USB
Press OK for displaying the list with available DB files (if any stored before). The DB files „STRONG_S2_
Database_TT_MM.DBM“ are shown with their built date (Day and Month). Select the DB file you want
to download and confirm it with OK. If DB is successfully downloaded (message appears on screen)
receiver will switch automatically to the first stored channel and show its content in the background.
Press EXIT until OSD menu disappears.
7.3.2.2 Backup to USB
Press OK to make a backup of the data base. A DBM-File „STRONG_S2_Database_TT_MM.DBM“,
shown with the actual Date (Day and Month), will be created on the USB-Device. If DB is successfully
uploaded a message saying this will be displayed on screen. Press EXIT until OSD menu disappears.
7.4 Time and Date Settings
Press MENU and select Time. The menu provides options to adjust the time and date settings and
allows you to setup scheduled recordings of programs in Timer submenu.
Press pq to select an option and tu to adjust the setting. Press EXIT to exit the menu.
Time Auto Select On for automatically time and date update from live signal or Off for
manual entering them.
Time Zone Select the Time Zone Offset.
Summer Time Select On or Off depending on the year’s period.
Date Enter the Date when Time Auto is set to Off.
Time Enter the Time when Time Auto is set to Off.
7.4.1 Timer (Schedule)
In this menu you can setup the schedule for automatic recording or switching to the defined channels
at a particular date/time. Timer menu can be direct entered out from viewing mode just by pressing the
BLUE button.
Add: Press RED button to add a new booking. In the appearing dialog select the
desired channel type and number, the starting date and time, end time, repeat
cycle (once, daily or weekly) and mode (view or record). Tip: For selecting
the number of desired channel you can use the tu or Numeric buttons but
also the fast channel Find option (Red button). It allows you to enter the right
channel number just by selecting the first letters of the channel´s name in the
new opened table.
Once you set all parameters, press OK to store your booking.
Edit: Press GREEN button to edit an existing booking.
Delete: Press BLUE button to delete a booking from the list. Press OK to confirm
deleting or EXIT to cancel it.
TIP: If you have scheduled recordings, make sure to have an external storage device
connected to the receiver. Check periodically, if free space is available on the storage
device for future recordings.
NOTE: You can set Timers for Programs directly from EPG. Please refer to section 6.8 for
more details.