User manual

4
PART 1 • English
4. VIDEO (RCA) To connect to the RCA video input of your TV or VCR using an
RCA cable
5. AUDIO (L/R) To connect to the audio input of your HIFI or television
6. TV SCART To connect to TV using a SCART cable
7. VCR SCART To connect to a Video or DVD recorder
8. HDMI To connect to the HDMI input of your TV using a good quality
HDMI cable.
9. Power cord The receiver requires a mains voltage of 100~240V AC 50~60Hz (auto
selecting). Please check the local power conditions before connecting
the receiver to the mains supply.
2.4 Remote Control
Fig. 3
1. STANDBY Turns the receiver ON/Standby
2. REC Starts recording of the current broadcast to the connected
storage device
3. LIST Displays a list of records available on the connected storage device
4. MUTE To turn the sound on or off.
5. EPG Viewing mode: Displays the EPG (Electronic Program Guide)
6. INFO Press once to display channel number/name and now/next info. Press
twice to display detailed event info and transponder/signal strength
information. Pressing again – back to viewing mode.
7. TTX To open teletext if available on current channel.
8. AUDIO Displays the audio selection menu with selections for available
languages and audio modes
9. DTV/VCR Switches to VCR input if it is in DTV state. Switches to DTV if it is in
VCR state
10. SUBTITLE To select subtitles language out of available ones on current channel
11. MENU To open the main menu in viewing mode or to go one step back in
the menu
12. EXIT Go back one step in the menu/cancellation of current process/exit
from main menu to viewing mode
13. tu Increasing/decreasing of the volume level in viewing mode/ navigating
through the menus/ changing values of settings in a menu
14. pq Switches to the next/previous channel in viewing mode or moving the
highlight up/down in the menu
15. OK Viewing mode: Displays the channel list. MENU: activation of the
highlighted item
16. FAVOURITE To access your favourite channels. Toggles between available
favourite groups
17. TV/RADIO Toggles between TV and Radio mode
18. 0-9 Channel number and numeric value input
19. RECALL To switch between the last viewed channels.
20. GOTO In TV mode shows the list of installed satellites for selecting their
channel lists. In playback/timeshift mode opens the time banner for
selection the moment where to jump.
21. 5/REV Searches backwards during playback. Each pressing increase the speed
(x2 – x32)
22. 6/FWD Searches forwards during playback. Each pressing increase the speed
(x2 – x32)
23. 7 /PREV Jumps to the previous file during playback
24. 8 /NEXT Jumps to the next file during playback