User manual

English

PART 1 • English

3. Now in viewing mode you can select channels from the chosen favourite group only by

pressing pq. If you want to change to the main channel list, press OK in viewing mode

and then press GOTO and select All satellites.

Delete a TV or radio programme

1. Select the programme you want to delete and press the BLUE button. A message will

appear. Press OK to delete the programme or EXIT to cancel.

2. Repeat the previous step to delete more programmes.

Skip TV or radio programme

1. Select the programme you want to skip and press the GREEN button.

2. The programme will be marked to skip. The receiver will skip this programme while zapping

between programmes in normal viewing mode (in channel list mode the skipped channels

remain selectable).

3. Repeat the previous step to skip more programmes.

4. To conﬁrm and exit the menu, press EXIT.

Disable a skipped TV or radio programme

Press the GREEN button on the programme marked with the skip symbol.

Move a TV or radio programme

1. Select the programme you want to move, then press the RED button. A move symbol

will appear.

2. Press pq tu to move the programme.

3. Press OK or RED again to conﬁrm the new position.

4. Repeat the above steps to move more channels.

Locking programmes

You can lock selected programmes for restricted view.

1. Select the programme you want to lock, then press the YELLOW button. The programme is

now marked as locked.

2. Repeat the previous step to select more programmes

3. To conﬁrm and exit the menu, press EXIT.

To view the locked programme, you need to enter either the default password '0000' or your last set

password. We recommend changing of the default password to one of your preference. Please refer to

chapter 7.6 System for more details.

Disable a locked TV or radio programme

Press the YELLOW button on the programme marked with the lock symbol.

Rename a TV or radio programme

1. Select the programme you want to rename and press the INFO button. A key table appears.

2. In the key table select a character by using the navigation buttons. Press OK to enter the

character. When you have entered the new name, navigate to the “OK” button on screen and

press OK on the remote control to conﬁrm the new name.