User manual

PART 1 • English
16
Edit transponder: Press GREEN to edit the highlighted transponder. In the pop-up banner, change
the transponder´s data by using the navigation and numeric buttons. Confirm
changes with OK or cancel with EXIT.
Delete transponder: Press YELLOW to delete the highlighted transponder. Press OK to confirm or
EXIT to cancel.
7.3.2 DB Management
This menu allows you to save and reload the channel data base of your receiver from/to a USB-device.
This very convenient feature enables you to save your personal settings like Channel-, Favourite-, Sat-
and TP-lists on an USB storage device and load them back to the receiver later. This feature is especially
helpful after unintentional changes or factory reset. In such cases just skip the First Installation by
pressing EXIT in First Installation and select the DB management menu.
Connect the USB storage device to you receiver and select one of the options:
7.3.2.1 Load from USB
Press OK for displaying the list with available DB files (if any stored before). The DB files „STRONG_S2_
Database_TT_MM.DBM“ are shown with their built date (day and month). Select the DB file you want to
load and confirm it with OK. When the DB has been loaded successfully (message appears on screen)
the receiver will switch automatically to the first stored channel and show its content in the background.
Press EXIT until the OSD menu disappears.
7.3.2.2 Backup to USB
Press OK to make a backup of the data base. A DBM-File „STRONG_S2_Database_TT_MM.DBM“, with
the current date (day and month), will be created on the USB-Device. When the DB has been stored
successfully a message will be displayed on screen. Press EXIT until the OSD menu disappears.
7.4 Time and date settings
Press MENU and select Time. The menu provides options to adjust the time and date settings.
Press pq to select an option and tu to adjust the setting. Press EXIT to exit the menu.
Time Auto: Select On for automatic time and date updates from live signal or Off for
entering them manually.
Time Zone: Select the Offset from GMT standard time.
Summer Time: Select On or Off depending on the year’s period.
Date: Enter the date when Time Auto is set to Off.
Time: Enter the time when Time Auto is set to Off.
7.4.1 Timer (Schedule)
In this menu you can setup the schedule for automatic switching to the defined channels at a particular
date/time. The timer menu can be entered directly from viewing mode by pressing the BLUE button.
Add: Press RED to add a new booking. In the appearing dialog, select channel type
and number, the starting date and time, end time, repeat cycle (once, daily or
weekly). for selecting the channel number you can use the tu or the numeric
buttons but also the fast channel find option (RED). It allows you to enter the