User manual

English
PART 1 • English
23
Problem Possible cause What to do
The external USB HDD does not
start.
Power consumption is too high. Connect an extra power supply
adapter to your USB HDD
device.
The receiver switches to standby
automatically.
Auto Standby function is
activated and has reached the set
time (default 3h).
Set the power down time or
disable it in the System Auto
Standby menu .
9.0 SPECIFICATIONS
Demodulator
Demodulation: QPSK, 8PSK
Input symbol rate: DVB-S QPSK: 1 ~ 45 Ms/s
DVB-S2 8PSK/QPSK: 10~30 Ms/s
FEC decoder: Auto, 1/2, 2/3, 3/4, 5/6, 7/8 in DVB-S mode
1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 in DVB-S2 mode
3/5, 2/3, 3/4, 5/6, 8/9, 9/10 in 8PSK mode
Video Decoder
Profile level: MPEG-2 MP@ML, MP@HL, MPEG-4 H.264/AVC
Input rate: Max. 20 Mbit/s
Aspect ratio: 4:3 and 16:9, Pan & Scan, Pillarbox Letterbox, Auto
Video resolution: PAL 50Hz: 576i, 576p, 720p, 1080i, 1080p
NTSC 60Hz: 480i, 480p, 720p, 1080i,1080p
Audio Decoder
Audio decoding: MPEG-1 Layer 1 & 2, AC3 Downmix
Audio mode: Mono L/R, Stereo, AC3
Sampling rate: 32, 44.1, 48 kHz
Tuner
Type1 F Type, IEC169-24, Female
Input frequency range: 950 – 2150 MHz
RF impedance: 75 Ohm unbalanced
Signal level: -65 to -25 dBm
LNB power: 13/18 V DC (± 5%), max. 0.5 A, overload protected
DiSEqC versions: 1.0, 1.1, 1.2, 1.3, Tone burst
System & Memory
Main processor: MSTAR MSD7816
Flash memory: 8 MBytes
System memory: 128 MBytes