Picture similar Digital High Definition Satellite Receiver SRT 7004 User manual Bedienungsanleitung Manuel d’Utilisateur Manuale utente Manual del usuario Manual do Utilizador
HOTLINE 0820 400 150 AT support_at@strong.tv 029 928 FR 0826 support_fr@strong.tv € 0,12/Min. österr. Festnetz € 0,15 par mn poste fixe en France 32 634451 BG +359 support_bg@strong.tv 1 445 26 10 CEE +36 support_hu@strong.tv IT 199 404 032 support_it@strong.tv Da rete fissa 24,8 cent. al min. 12,5 cent. scatto alla risposta Da rete mobile max 49 cent. al min. 15,6 cent. scatto alla risposta 501 49 91 DE 0180 support_de@strong.tv NL € 0,14/Min. deutsches Festnetz € 0,42/Min. max.
PART 1 • English English SRT 7004 is delivered with USB multimedia support. After downloading the PVR software from the website www.strong.tv the receiver can be upgraded to support the recording function via USB. This user manual describes the full functionality including the recording function and may not be applicable if the PVR software has not yet been installed.
PART 1 • English Table of Contents 03Nov201414:30 1.0 Instruction 3 1.1 Safety Instructions 3 1.2 Storage 3 1.3 Equipment Set-up 4 1.4 Accessories 4 1.5 Usage of external USB devices* 4 2.0 Your Receiver 5 2.1 Default PIN: 0000 5 2.2 Front panel 5 2.3 Rear panel 5 2.4 Remote Control 5 2.5 Installing the batteries 7 2.6 Using the remote control 7 3.0 Connections 7 3.1 Basic connection using an HDMI cable 7 3.2 Basic connection using a Scart cable 7 3.
PART 1 • English English 1.0 Instruction 1.1 Safety Instructions DO NOT INSTALL YOUR RECEIVER: In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a surface which might obstruct the ventilation slots.
PART 1 • English packaging with its accessories. Failing to comply with such packaging procedures could damage the product and void your warranty. 1.3 Equipment Set-up We recommend you consult a professional installer to set up your equipment. Otherwise, please follow the instructions below: Refer to the user manual of your TV and your antenna. Make sure that the SCART/HDMI cable and outdoor components are in a good condition and the SCART/HDMI connections are well shielded and from good quality.
PART 1 • English Please ensure that either the USB device is already formatted to FAT/FAT32, or format English the USB device via your receiver, refer to chapter 7.3 Multimedia for details. *This user manual describes the full functionality including the recording function and may not be applicable if the PVR software has not yet been installed. 2.0 Your Receiver 2.1 Default PIN: 0000 2.2 Front panel Fig. 1 1. USB: To connect a USB storage device for multimedia functions or software updates 2.
PART 1 • English 2. 3. 4. 5. 6. ! To mute the audio outputs RED Flexible functions in OSD menu and Teletext GREEN Flexible functions in OSD menu and Teletext. YELLOW Flexible functions in OSD menu and Teletext. BLUE In viewing mode: Opens the Timer menu for easy setup timers; Flexible functions in OSD menu and Teletext. 7. SUBTITLE Selects the subtitle language 8. TEXT Opens Videotext if available 9. AUDIO Opens the audio selection Switches between the last viewed channels. 10. 11.
2.5 Installing the batteries Fig. 4 Remove the battery cover from the remote control and put 2x AAA size batteries inside the compartment. The diagram inside the battery compartment shows the correct way to install the batteries. 1. Open the cover 2. Install batteries 3. Close the cover NOTE: The batteries should not be recharged, disassembled, electrically shortcircuited, be mixed or used with other types of batteries. 2.6 Using the remote control Fig.
PART 1 • English 3.3 Connecting multiple fixed LNBs using a DiSEqC 1.0/1.1 switch a.: C onnect the LNBs of your fixed antenna to the inputs of a DiSEqC 1.0/1.1 switch b.: Connect the output or “to receiver” connector of the DiSEqC 1.0/1.1 switch to the SAT IN connector on your receiver. c.: R efer to section 3.1 or 3.2 for TV and mains connections. d.: Refer to section 7.3.1.1 for Satellite Settings Fig. 8 3.4 Connecting to Ethernet Fig.
PART 1 • English 4.1.1 Satellite Setting Press pq to highlight the satellite your dish is aimed at. When using a multi feed antenna with more than 1 LNB, select the satellites your antenna is adjusted for by pressing the OK button and set the appropriate DiSEqC input for the LNBs Astra 19.2E and Hotbird 13E are pre-selected on DiSEqC 1 and 2. The scan process will then search on all selected satellites. If you have a non-standard setup, then please refer to section 7.3.1.
PART 1 • English Via direct access Via the channel list Via the pq buttons Via the button 6.1.1 Direct access To gain direct access to a certain channel, simply enter its number with the 0~9 buttons on the remote control. Channel numbers can be up to four digits long. Entering a number with less than four digits is possible. Just wait a few seconds (or press OK) and your receiver will switch to the selected channel. 6.1.2 Channel list Press OK in viewing mode to display the channel list.
PART 1 • English Some channels support a choice of different audio formats and/or languages. To select another audio stream, press AUDIO in viewing mode. A list with available audio streams will now be displayed. Press pq to select a stream and confirm with OK. With the tu buttons you can choose between mono left, mono right or stereo audio. 6.4 Teletext Your receiver includes a fully featured Teletext.
PART 1 • English Simply press 4 and confirm with OK to start the recording. Default recording time is set to 2:00 hours. If you like to change the duration time of a recording, press 4 and select the duration with tu. During the recording a recording sign will be shown in the channel list. To stop the recording, press 3 and press OK again to stop the recording.
DiSEqC1.2 Move the motor to the right position for locking the signal like explained below. Move Continue: press tu for moving West/East. It will keep moving as long as the button is kept pressed. By pressing once it will move in 1° step. Move Step(1): press tu for moving West/East in 0.3° step. Store Position: to store the current motor position for selected satellite. Goto Reference: to go to the reference 0° position. GOTO X Select GOTO X with the tu buttons.
PART 1 • English Transponder list: Press BLUE to delete a transponder from the list. Press GREEN to delete the selected transponder, select YELLOW to delete all transponders. Confirm deleting with OK or EXIT to cancel. Edit: While in the satellite name list: Press RED Edit to enter the Sat Edit window. Select the satellites position E for East and W for West. Longitude: Use the numeric keys to enter the longitude of the satellite.
progress has been completed, all found channels will be stored and the receiver will switch to the first found channel. 7.1.5 Manual scan - Scanning by transponder Select the options if you want to do a manual scan. (Advanced users.) Satellite: Select the satellite you wish to scan from, as previously set up in the Satellite Setting menu. Frequency: Enter a known frequency of a satellite transponder with the 0 ~ 9 buttons on the remote.
PART 1 • English A Favourite Type window will pop up on screen. The following 8 groups are available: Music, Sport, Shopping, News, Movie, Talk shows and two personal lists. All types of Favourite List are represented with an icon. Please select one (or more) of them. Below the preview window you can see to which favourite list the programme belongs. 2. Repeat the previous step to select more favourite programmes. 3. To confirm and exit the menu, press EXIT. You will be prompted to confirm the changes.
4. Press OK to confirm the new position. 5. Repeat the above steps to move more channels. Locking programmes You can lock selected programmes for restricted view. 1. Select the programme you want to lock, and then press the GREEN button. The programme is now marked as locked. 2. Repeat the previous step to select more programmes 3. To confirm and exit the menu, press EXIT. 4. In viewing mode: When coming to a locked channel: Press exit at the warning popup and enter your Password.
PART 1 • English Note The 1st time the option is selected, the first possibility is executed, if you select the same option again, the 2nd possibility is executed. (Example: 1st time A-Z/Z-A will yield A-Z order. 2nd time will yield Z-A) 7.2.3 Radio Channel Editor Press MENU and select Channel using the tu buttons. Use the pq buttons to select the Radio Channel Editor submenu. Press OK to edit programme settings. Press EXIT to exit the menu. Refer to 7.1.
Set Time: Enter the time using tu and the numeric buttons when GMT Usage is set to Off. Sleep Time: Enter the duration the unit should continue running before switching itself off. Select 15 min up to 120 min or Off. Summer Time: Select On or Off depending on the year’s period. 7.2.5.4 TV setup Press MENU and select TV Setting. The menu provides options to adjust the interaction between TV (monitor) and this receiver. Press pq to select an option and tu to adjust the setting.
PART 1 • English Auto Switch Off Auto Standby is a new, power saving feature that helps you reduce power consumption. It will switch off the receiver when no command is given for the defined period of time. It is set per default to 3 hours. With the tu buttons you can select between different time intervals or Off for disabling the feature. Note If there are timers running, the auto standby function will be disabled for the booked time.
PART 1 • English 7.2.5.7 Update & Backup English Select System then Update & Backup from the main menu and press OK to select. Image upgrade NOTE: The front panel USB port is especially adapted for Software update. The upgrade can be performed with an USB device, preferably an USB pen drive. The USB device must have been formatted in FAT32. Download the required update file for your receiver model from the support page on our website www.strong.tv or contact your local dealer.
PART 1 • English Warning A factory reset will permanently delete all your personal settings, timers and stored channels. Please consider this before you perform a factory reset. Others Here you will find some simple convenient items to use. Calendar Find out quickly what day is a certain date. Calculator Have quick access to a digital calculator. Game Select from three games, follow the instructions on screen.
PART 1 • English mass storage devices and assumes no responsibility for any loss of data that may occur when connected to this unit. With large amounts of data, it may take longer for the system to read the contents of a USB device. Some USB devices may not be properly recognized. Even when they are in a supported format, some files may not play or display depending on the content. It is possible to use already by PC formatted NTFS HDDs. 7.3.
PART 1 • English 7.3.1.2 Music These options available with the RED button: Random: On: Music will be played in a random order. Repeat: All: Repeat at the end of the list. Info option: Show Lyrics or Music info Display: Show Equalizer or Cover Options available with the GREEN button: Folder view or Thumbnail view, During slide show: Switch between Equalizer and Cover. Options available with the YELLOW button: Switch between Lyrics or Music info 7.3.1.
button. A confirmation request message pops up for deleting the selected file(s), select the delete or the cancel option with tu and press OK. In playback mode the following functions and buttons can be used: 1, OK, 3, 6, 5, 7, 8, SUBTITLE, TEXT, AUDIO, , GOTO, 0~9, STEP, ZOOM+/ZOOM-, !, EXIT. 1: Starts/resumes playback OK,2: Pauses/resumes playback 3: Stops playback and returns to the recording manager from full screen playback.
PART 1 • English (15 min steps) and pq (1 hour steps), you can setup the recording length time and then press 4 again. During the recording you can change the recording length time by pressing 4. Default Recording Period: You can setup the default recording time period by pressing tu. *This user manual describes the full functionality including the recording function and may not be applicable if the PVR software has not yet been installed. 8.
PART 1 • English Change to a larger dish Change position of dish Signal is too strong, dish is oversized. Connect a signal attenuator to the LNB input. Ask a local satellite specialist for advice. Bad picture / blocking error during heavy rain. Heavy rain will attenuate satellite signals, below a certain level blocking will occur. Make sure your dish installation is up to standards to minimize rain effects. When in doubt, ask a local satellite specialist for advice.
PART 1 • English Contact local Service Hotline or send email to our support via www.strong.tv Password forgotten 9.
PART 1 • English Ethernet RJ45 Auto (DHCP) and Manual setup. English Network Connector: Wired IP setup: Connectors Ethernet RJ45 SAT IN F-type female SAT OUT F-type female HDMI USB 2.
PART 1 • English 30