User manual

9
PART 1 • English
English
Booking a program from EPG
Select a program as described above. Once the desired program is selected, press BLUE. This will lead
you to the timer menu. All details are already filled in for you. Make a choice between Play or Record
action and save the timer. Please refer to section 7.3.4 for details.
6.8 Instant Recording
Your new receiver allows you to make an instant recording of the program you are watching. Simply press
4 to start the recording. To enter the duration for the recording, press 4 again. Use the [0~9] keys to
input the desired recording time.
During the recording a banner showing the elapsed recording time will be shown on the upper right of
your TV screen. To stop the recording, press 3.
* Please connect an USB storage device with sufficient free space before you start a recording. For
recording HD broadcast, a high speed device is needed.
6.9 Timeshift
The Timeshift function allows you to pause live broadcasts and resume normal watching without missing
anything. Press 2 to freeze the current broadcast. Press 2 again to start time shifted playback. To stop
Timeshift, press 3.
Note: The Timeshift will only work correctly when a fast USB storage device such as
an USB2.0 HDD is connected to the receiver. Distorted picture and / or audio
during Timeshift indicate a low USB device speed. STRONG cannot guarantee
for USB devices used. Especially when Timeshift is activated at channels with
high data rate (High quality SD/HD), STRONG cannot guarantee an accurate
Playback of the Timeshift file.
7.0 MAIN MENU
All important settings and features of your receiver can be operated from the Main Menu. It consists
of the following sub-menus: Installation, Setup, Channel, Advanced and Games. Use tu to select a
sub-menu and pq to choose an option. Press OK to advance to the chosen submenu. Press MENU in
viewing mode to display the Main Menu.
7.1 Installation
The installation menu allows you to change satellite settings and to search for channels. It consists of the
following sub-menus: Satellite Settings, Auto Scan, Manual Scan and Satellite Edit. Choose the desired sub
menu with pq and press OK to advance.
7.1.1 Satellite Settings
Use this menu to change the settings for a given satellite and to configure the parameters for the used
antenna Use pq to highlight Satellite and tu to set the satellite you wish to change the settings for.
To see a list with all available satellites, press OK when the highlight is on Satellite. Use pq to highlight