User manual

12
PART 1 • English
Once all settings are made, press EXIT to leave the Language menu. A confirmation banner will be
shown. Press OK to save your settings or EXIT to discard.
7.2.2 Output Options
This is the menu to configure the audio and video outputs of your receiver. Use pq to highlight the
setting you wish to change and tu to change the value of the highlighted setting. Press OK for a list
with all available options for the chosen setting.
TV Standard: Set the standard corresponding to your TV set. Available options are: Auto,
NTSC, PAL and SECAM.
Aspect Ratio: Use this option to set the aspect ratio of your TV set. Available options are: 4:3
and 16:9.
Conversion mode: Use this option to set the preferred way of converting 16:9 broadcasts to 4:3 TV
format. You can choose between the following options: Letter-box (the full 16:9
picture will be displayed on your 4:3 TV set with black bars above and below the
picture.), Pan and scan (The centre of the 16:9 picture will be displayed full-screen
on your 4:3 TV) and Combined (Combination of Letter-box and Pan and scan.)
SCART Mode: Select RGB for the best picture quality or CVBS in case your TV doesn’t support RGB.
Digital Audio: Defines the format available on the S/PDIF output of your receiver. When set
to PCM, the digital output will always output PCM stereo regardless of the
broadcasted audio format. The Auto setting will pass all incoming digital audio
through the digital output. Use this option if you have your receiver connected
to a digital surround amplifier. The digital output can be switched off by setting
Digital Audio to Off.
Video Format: This setting is only active when the receiver is connected to the TV set via
HDMI. It allows you to set the preferred HDMI screen resolution. Available
options depend from your TV set.
Once all settings are made, press EXIT to leave the Output Options menu. A confirmation banner will be
shown. Press OK to save your settings or EXIT to discard.
7.2.3 Time Setting
This menu allows you to set the way the receiver collects and adjusts the time. You can also adjust the Auto
Power Down function here. Use pq to highlight the setting you wish to change and tu or [0~9] to change
the value of the highlighted setting. Press OK for a list with all available options for the chosen setting.
Time Display: Defines when the front panel display will show the clock. Possible settings are:
Off and Stand-by only.
Use GMT: On: the receiver will use broadcast time. Use the Time Zone setting to define
the deviation from GMT time. Summer Time can be set to On or Off.
Use GMT: Off: Allows you to enter the time settings manually. Use the [0~9] buttons to set
the current time in the Local Time option. Use pq to move the highlight to
Local Date and press OK. A calendar will be displayed. Use pqtu to select
the actual date and press GREEN to confirm.