User manual

17
PART 1 • English
English
Exporting channel data
To export all channel data, enter USB Update and press BLUE. Follow the directions on screen. This
function requires a correctly formatted USB storage device to be connected to the receiver.
Software upgrade
The software files should be placed in the root directory of the device. Connect the USB device to
the receiver and enter USB update. An attention banner will now be displayed. Press OK to start the
update.
WARNING: NEVER power off the receiver or remove the USB device during the
software update process. Doing so might cause irreparable damage to
your receiver and will void your warranty.
7.4.3 OTA
The OTA (Over the Air) function allows you to search for software updates available on satellite.
Please ask your local Strong dealer or visit our website for according information.
In the OTA menu make all necessary settings (Satellite, Frequency, Polarisation and Symbolrate) and
press GREEN to start the update process.
WARNING: NEVER power off the receiver or pull the mains plug during the software
upgrade process. Doing so might cause irreparable damage to your
receiver and will void your warranty.
7.4.4 Factory Reset
A factory reset will restore your receiver to the factory default settings. To reset the receiver, you have
to enter your PIN code (Default PIN:0000). After the reset, the receiver will start up in the Setup
Wizard.
WARNING: A factory reset will permanently delete all your personal settings, timers and
stored channels. Please consider this before you perform a factory reset.
7.5 Games
Your receiver is equipped with 4 games.
To play a game, select one of the four available games (Sudoku, Tetris, Snake or Box) and press OK to
enter the game. Please follow the directions on screen.
8.0 TROUBLESHOOTING
There may be various reasons for abnormal operation of the receiver. Please check the receiver
according to the procedures shown below. If the receiver does not work properly after checking
it, please contact your local Serviceline or STRONG dealer. Alternatively you can send a support
mail via our website: www.strong.tv. NEVER open or disassemble your receiver. This may cause a
dangerous situation and will void the warranty.