Operation Manual

PART 1 • English

Connecting a dish on a motorized positioner to your receiver.

Another possibility for watching programs from multiple satellites is by mounting a dish to a motorized

DiSEqC 1.2 positioner.

Have your dealer mount the dish to the positioner, set the correct angle of the elevation and let him set the

center point for your positioner. Connect the LNB with a coax cable to the LNB IN connector of the positioner,

and connect the OUT connector of the positioner to the SAT IN connector at the back of your receiver.

Figure 5

3.2 Connecting to TV & VCR

Connecting by HDMI cable

To fully enjoy your HDTV channels it is advisable to use HDMI or Component video outputs of your receiver.

Connect one end of HDMI cable to the HDMI output of your receiver and another end of cable to HDMI

IN connector on your TV.

Figure 6