Operation Manual

PART 1 • English
18
5.2.3 Edit satellites
In this menu you can edit satellite’s name, angle, location and transponder, as well as add new satellite.
Press RED button to edit a satellite’s properties.
Press GREEN to add new satellite.
Edit existing satellite and add new satellite functions are identical.
Name:
press OK button to edit name of the satellite. On screen will appear keyboard.
To delete current name select
t (GREEN buttons) and press OK. To enter new
name, use tu and OK buttons. Press YELLOW button to save new name or
press BLUE button to exit
Angle: Use 0 ~ 9 buttons to enter value of orbital position of the satellite.
Location:
Use tu buttons to select East or West location of the satellite.
Transponder table:
press OK button to enter to edit transponder table menu. In this menu use
RED button to edit parameters of selected transponder, GREEN button to add
new transponder or YELLOW to delete selected transponder.
To save changes you have made press
YELLOW (Save) or BLUE (Save&Exit) button.
5.2.4 GOTO X set-up
In this menu you should set your geographical location, if you use positioner and it supports GOTO X.
Use pq buttons to navigate in the menu.
Use 0 ~ 9 buttons to enter values.
Use tubuttons to select an option.
To save changes you have made press
YELLOW (Save) or BLUE (Save&Exit) button.
5.3 Installation
5.3.1 Preference
In this menu, you can set up your personal preferences.
OSD language, Audio language, Subtitle language
Use tu buttons select an item or OK button to display a list..
Banner Timeout
To set banner duration (how long information banner will be displayed on screen).
Use tu buttons select an item or OK button to display a list.
Transparency
Use tu buttons to select the transparency level or OK button to display a list.
CAM messages
To enable or disable displaying of messages from Conditional Access Module. Disabling of CAM
messages could be necessary in order to not disturb you while zapping through channels which can’t be
descrambled by your smart card.