Operation Manual

PART 1 • English
24
6.3.2 Selection of the list
From view mode or channel list mode press SAT
button to display a list of installed satellites, FAV
button to display a list of favourite groups. Use pq buttons to select an item in the list and press OK to
confirm selection.
To toggle between TV and Radio channels use
TV/RAD button.
6.3.3 Favourite list selection.
From view mode or channel list mode press FAV button and use pq buttons to select favourite group
of your choice. Press OK to confirm selection.
6.3.4 Selection of Audio Language
From view mode press the
AUDIO button on your remote control. Use tu buttons to select an audio
language out of the list. Use tu buttons to select audio channel between Left, Right and Stereo. Press
OK to confirm your selection.
6.3.5 TELETEXT function
In channel view mode press TEXT button. If Teletext is available in several languages, then select
language from the list.
6.3.6 Subtitles function
In channel view mode press SUB button. List of available subtitles languages will be displayed on the
screen. Use tu buttons to select language and OK to confirm. To disable subtitles select OFF from the
list of the languages.
6.4 PDR functions
The software supports full range of PDR functionality! The usage is based on your own risk! Recording
of HD signals requires very high record speed. Therefore the accurate function is depending on the
used external USB device. STRONG cannot guarantee for USB devices used. Especially when Timeshift
is activated at channels with high data rate, STRONG cannot guarantee an accurate Playback of the
Timeshift file. Any risk of the PDR function usage shall not be passed to STRONG!
6.4.1 Record
Select the desired TV channel you want to record.
Press the ● (RECORD) button on the remote control to start recording.
Recording Info banner appears and shows the file name, recording time and duration (which can be
adjusted in Application ->PDR menu). It will disappear within OSD-timeout interval.
To recall this banner during recording press the
INFO button.
During recording you can call up the Record Channel List by pressing the OK button to watch another
Free-To-Air channel within the same transponder.
To stop recording at any time press
■ (STOP) button.
If you want to delete recorded file(s) from the
Recording File List press the RED (delete) or GREEN
(All delete) button.