Operation Manual

PART 1 • English
5
English
2.0 YOUR RECEIVER
2.1 Front Panel
Figure 1
1. POWER
Switches the receiver power On and Standby.
2.
MENU
Gets into Main Page screen.
3.
OK
Executes the selected item.
4.
pq CH Up/Down
Channel up/down or selects the item of Menu.
5.
tu VOL Up/Down
Volume up/down or selects the item of Menu.
6.
Stand-by LED
Light up red when receiver is in stand-by mode. Off when receiver is in awake mode.
7.
USB LED
Light up green when USB device is connected to USB connector at the back of the receiver.
8.
4 digits indicator
In awake mode displays channel number. In stand-by mode displays current time/
9. Front panel flap
9a 2 Common Interface slots
9b Smart card reader for Conax smart card