Operation Manual

10
PART 1 • English
Select Yes to save the changes or No to discard. Locking/unlocking multiple channels in one session
is possible.
7.1.1.3 Skipping channels
Channels marked with Skip will be skipped when zapping channels with the pq buttons. Despite
that, these channels are still available from the channel list.
To mark channels for skipping, press GREEN while in TV Channel List. The Skip symbol on the top of
the screen will move up to indicate that the Skip function is selected. Use pq to select the desired
channel and press OK to mark or unmark it for skipping. Channels set for skipping will be marked
with the  symbol. Once all changes are made, press EXIT twice. A confirmation banner will pop up.
Select Yes to save the changes or No to discard.
7.1.1.4 Moving channels
To enable the Move function, press YELLOW while in TV Channel List. The Move symbol on the top of
the screen will move up to indicate that the Move function is selected. Use pq to select the desired
channel and press OK to select it. You can now move the selected channel up or down the channel
list using pq. Once the channel is on the desired position, press OK again. The channel is now fixed
on its new position. Once all changes are made, press EXIT twice. A confirmation banner will pop up.
Select Yes to save the changes or No to discard.
7.1.1.5 Editing channels
The Edit function allows you to Sort, Rename or Delete channels. To enter the Edit menu, press BLUE
while in TV Channel List. The Edit Channel menu will appear.
If you made changes in the previous menu, but not saved them yet, you will be asked to do so now.
Sort
Press RED to enter the Sort menu.
Use pq to select the desired sorting method and press OK to confirm.
Possible methods are:
Name (A-Z): Sorting in alphabetical order from A to Z.
Name (Z-A): Sorting in alphabetical order from Z to A.
Free/Scramble: First in the list will be Free-To-Air channels.
Lock: All unlocked channels will placed first in the list.
Default: Sorting by searched Order (from lowest to highest frequency or by LCN
numbering).
Rename
Press GREEN in Edit Channel to enable the Rename function. The Rename sign will move up to
indicate that Rename is selected. Use pq to highlight the desired channel and press OK to select it.
A text field will now pop up at the right of the screen. Use tu pq to select the desired characters
and enter them with OK. Once you have finished editing, press BLUE to enter the changes. Once all
changes are made, press EXIT twice. Select Yes to save the changes or No to discard.