Operation Manual

PART 1 • English

The following settings are available:

Antenna Power: Set to On if you use an active antenna. When set to On, 5 V will be present on

the ANT IN connector of the receiver. Select Off for passive antennas.

Beeper: Select On for an audible indication of signal reception. Off turns the

beeper off.

Channel No.: Select a channel that is known to carry a broadcast in your region. The Signal

Strength and Signal Quality bars give a visual indication of the reception.

Adjust your antenna to obtain maximum signal strength and quality.

Press EXIT to leave the Aerial Adjustment screen.

7.2.4 LCN (Logical Channel Numbering)

If LCN (Logical Channel Numbering) is activated and an LCN signal is provided by the operator,

channels will be stored in an operator deﬁned order. Set LCN to On to activate operator deﬁned

channel numbering or Off to store channels in found order.

7.3 System Setup

This menu allows you to manage the system settings of your receiver. It consists of the following sub-

menus: Language, TV System, Local Time Setting, Timer Setting, Parental Lock, OSD Setting, Favourite

and Auto Standby.

Press pq to highlight desired menu and press OK advance to the next screen. Use pq to move

the highlight to the desired setting. Values can be changed with tu. Press EXIT to leave.

7.3.1 Language

This menu allows you to set up your language preferences.

Language: Use tu to select the desired language for the On Screen Display.

First Audio: Use tu to select the desired Audio language.

Second Audio: Use tu to select a language that will be played when the language selected

at First Audio isn’t available.

Subtitle Language: Use tu to select the preferred subtitle language.

Subtitles: Use tu to select the preferred subtitle type to be displayed automatically.

Select Normal, Hard of Hearing or Off

Teletext: Use tu to select the preferred teletext language (when available.)

7.3.2 TV System

Use this menu to match your receiver to your TV set. The following settings are available:

Video Resolution: Toggles between 576i up to 1080p. Please use a setting that matches your

TV’s speciﬁcations. After a selection is made, you will be asked to conﬁrm.

NOTE: Selection is only applicable on HDMI.

Aspect Mode: Use this option to select the aspect ratio of your TV and the preferred

conversion method. Options are: Auto (automatic detection of aspect ratio),

4:3 Panscan (Displays 16:9 widescreen broadcasts full screen on your 4:3 TV),

4:3 letterbox (black bars on top and under the picture on a 4:3 TV) and 16:9

(use this setting for 16:9 TV sets).