User manual

PART 1 • English

English

5.0 QUICK GUIDE TO USING YOUR RECEIVER

We at STRONG understand that you can’t wait to enjoy your new high deﬁnition digital terrestrial

receiver. The following quick guide will make you familiar with the basic operation of this device. We

do, however, advice you to read the full manual to get the best performance from your receiver.

To turn your receiver ON or to Standby, use the q button on the remote control.

Choose the desired channel with the pq buttons. Alternatively, you can digit the channel number

with the 0~9 buttons on the remote control. Or press OK in viewing mode to display the channel list.

The volume can be adjusted with the tu buttons.

6.0 OPERATION

Your new receiver is equipped with several features to make watching TV a true pleasure. This

paragraph describes these features. Please also read chapter 7.0 to get familiar with the menu of

your receiver.

6.1 Changing channels

Your new receiver is equipped with four ways to change channels.

 Via direct access using the 0~9 buttons.

 Via the channel list trough OK button.

 Via the PG+ and PG- keys.

 Via the pq keys.

6.1.1 Direct access via 0~9 buttons

To gain direct access to a certain channel, simply input its number with the 0~9 buttons on the

remote control. Channel numbers can be up to four digits long. Entering a number with less than

four digits is possible. Just wait a few seconds and your receiver will switch to the selected channel or

press OK immediately after selecting the channel number.

6.1.2 Channel list

Press OK in viewing mode to display the Channel List. Use pq in the Channel List to highlight your

channel of choice and press OK once to select the highlighted channel. Press OK again to leave the

Channel List.

TIP: Use tu to toggle between the All Channel list and favourite lists or press

FAV for a list of available favourite lists.

6.1.3 Using the pq or PG+/PG- keys

p switches to the next channel.

q switches to the previous channel.

PG+ switches to the next 10 channels.

PG- switches to the previous 10 channels.