User manual

PART 1 • English

English

Delete

Press BLUE in Edit Channel to enable the Delete function. The Delete sign will move up to indicate

that Delete is selected. Use pq to highlight a channel and press OK to mark it for deletion. The

receiver asks you to enter the pin code. Once you have marked all channels you wish to delete, press

EXIT twice. A conﬁrmation banner will be displayed. Select Yes to delete the marked channels or No

to cancel.

7.1.2 Radio Channel List

Basically, the operation of the Radio Channel List is the same as in the TV Channel List. The only

difference is that in Radio Channel List there is no video information, so it will always display the radio

logo at the right preview screen.

7.1.3 Delete all

Use this menu to delete all stored channels. Select Delete All with pq and press OK. The receiver

asks you to enter the pin code. (Default pin:0000). In the conﬁrmation window select Yes with tu

and press OK to delete or select No to cancel.

WARNING! The Delete all function will permanently delete all current channels and all

favourite lists from your receiver, and you are not able to leave the menu until

you search for channels again.

7.2 Installation

7.2.1 Auto Scan

Use pq to select Installation and press OK or u to advance.

Select Auto Scan with pq and press OK to enter.

Use tu to toggle between FTA Only Yes or No. When FTA Only is set to Yes, scrambled channels

won’t be stored in the channel list. Use pq to highlight Search. Now press OK to start auto scan.

The receiver will store all newly found channels in the channel list.

7.2.2 Channel Scan

Use pq to select Installation, press OK or u to advance.

Use pq to select Channel Scan and press OK to enter.

Use tu to toggle between available scan modes: By Channel and By Frequency.

If By Channel is selected, use the cursor buttons to select Scan Band and Channel No. If By Frequency

is selected, use the cursor buttons to select Frequency and Bandwidth. Highlight Search and press OK

to start scanning. Newly found channels will be stored in the channel list.

7.2.3 Aerial Adjustment

Use pq to select Installation, press OK or u to advance.

Use pq to select Aerial Adjustment and press OK to enter.

Use pq move the highlight to the setting you wish to alter and use tu to change values.