User manual

14
PART 1 • English
7.3.5 Parental Lock
This menu allows you to protect the installation menu and/or channels with a password. You can also
enter a new password in the Parental Lock menu.
Use pq to select Parental Lock from the System Setup menu and press OK to proceed. You will be
asked to enter your pin code. (DEFAULT: 0000)
Menu Lock: Locks the installation menu. You can set Menu Lock to On or Off.
Channel Lock: Choose between: Off, AGE 4, AGE 5, …up to AGE 18. Channels with a
parental rating above the chosen age will be protected with a password (if
available in your local broadcast.)
New Password: Enter your new password (4 digits) here.
Confirm Password: Re-enter your password here to confirm.
7.3.6 OSD Setting
This menu allows you to change settings for: OSD Timeout and OSD Transparency.
OSD timeout: Sets the time after which on screen banners and messages disappear. The
range is 1~10 seconds.
OSD Transparency: To set the OSD transparency from Off ~ 40% with 10% steps.
Load Default OSD Setting:
Press OK to clear all OSD settings and reset to default values.
7.3.7 Favourite
This menu allows you to personalize the names of the 8 available favourite lists.
Use pq to select Favourite from the System Setup Menu and press OK to proceed. The names of all
groups are now displayed. Select favourite group with pq and press OK to edit its name. A text field
will now pop up at the right of the screen. Use tu pq to select characters and enter them with OK.
When you have finished editing, press BLUE to save the changes. When all changes have been made,
press EXIT twice.
7.3.8 Auto Standby
Auto Standby is a new feature that helps you reducing power consumption. When set to On, the
receiver will turn to standby if it doesn’t receive any commands for three hours. Set Auto Standby to
Off to avoid the automatic switch down.
7.4 Tools
Press MENU in viewing mode to enter the Main Menu.
Select the Tools submenu with pq and press OK or u to enter.
Use pq to highlight the submenu of choice and press OK proceed.
Press EXIT to leave.
7.4.1 Receiver Information
This submenu shows receiver specific information such as hardware version and software version.
It also displays our web address www.strong.tv. Please have the Receiver Information screen on hand
when you call our hotline. The person who answers your call might ask for the information given in
this screen.