User manual

PART 1 • English

English

1.3 Equipment Set-up

We recommend you consult a professional installer to set up your equipment. Otherwise, please

follow the instructions below:

 Refer to the user manual of your TV and antenna.

 Make sure that the HDMI cable and outdoor components are in a good condition.

 Use only a HDMI 1.3 cable or higher for maximum performance.

 If you use TV SCART connection, use then well shielded SCART cable.

This manual provides complete instructions for installing and using this receiver. The following

symbols will serve as follow.

MENU Represents a button on the remote control or the receiver.

(Bold Character)

Move to Represents a menu item within a window.

(Italic Character)

1.4 Accessories

 User manual

 1 remote control unit

 2x batteries (AAA type)

NOTE: The batteries should not be recharged, disassembled, electrically short-

circuited, be mixed or used with other types of batteries.

1.5 Usage of external USB devices

 It is recommended to use USB 2.0 storage devices or higher. If your device is not

compatible to USB 2.0 speciﬁcations, recording, playback and other multimedia

functions of the receiver might not work properly.

 To ensure best performance of your USB storage device please format it by this

receiver (menu “Media+”) to FAT32 system. Other ﬁle systems are not supported by

the receiver. However, it is possible to use already NTFS formatted disks. STRONG

cannot guarantee compatibility with all types of USB storage devices.

 It is advised not to store important information on USB storage devices used with

the receiver. Always make backups of data on your USB storage device before using it

with this receiver. STRONG will not take responsibility for any loss of information or

circumstances caused by loss of information.

2.0 YOUR RECEIVER

2.1 PIN-CODE DEFAULT: 0000

2.2 Front Panel

Fig. 1

1. USB: Connector for USB devices.

2. IR sensor: Point your remote control towards this sensor.