User manual

PART 1 • English

English

3.0 CONNECTION

3.1 Connecting to a Terrestrial Antenna

Fig. 4

To receive broadcast signal, your terrestrial indoor or outdoor antenna must be connected to the ANT IN

connector on the back of the receiver. Use a properly shielded antenna cable and suitable connectors.

The TO TV connector allows you to loop the antenna signal to a second receiver or TV set.

3.2 Connecting to TV with HDMI cable

Fig. 4

The TV set shall be connected with the receiver using a good quality HDMI 1.3 or higher cable. This

connection gives the highest possible quality.

3.3 Connecting to TV with SCART cable

Fig. 4

SRT 8102+ is also equipped with a SCART connector; alternatively, the TV set can be connected to the

receiver using a good quality SCART cable.

3.4 Connecting to a Digital Audio Ampliﬁer with S/PDIF

Fig. 4

By connecting your receiver to a digital ampliﬁer or home theatre system, you can enjoy the best possible

sound quality and multi-channel audio (depending on broadcast). Connect your Digital Audio Ampliﬁer or

home theatre system with a suitable cinch cable to the S/PDIF connector on the back of the receiver.

3.5 Connecting to a Digital Audio Ampliﬁer and TV

using HDMI

Fig. 5

By connecting your receiver to the latest digital ampliﬁers or Home Cinema systems with HDMI

connections, you will enjoy the best possible sound quality and multi-channel audio (depending on

broadcast). Connect the HDMI output of the receiver to an input of your ampliﬁer, and then connect

the HDMI output of the ampliﬁer to your TV set. Select the correct input on your ampliﬁer to watch

and listen to programmes.

3.6 Connecting a USB storage device

Fig. 6

NOTE: We recommend the use of a hard disk drive USB 2.0 or higher for recording

and play back of TV events.

For proper functioning of Time Shift and recording functions, a fast USB device (such as a hard

disk drive) is needed. Interrupted playback or a distorted picture during playback or Time Shift are

indications for a low device speed. STRONG cannot guarantee proper functioning of recoding and or

Time Shift functions with all USB devices.