Picture similar Digital High Definition Terrestrial Receiver SRT 8110 User Manual
PART 1 • English 2 2 3 3 3 2. Your Receiver 2.1 PIN code default: 8888 2.2 Front panel 2.3 Rear panel 2.4 Remote Control 2.5 Installing the Batteries 2.6 Using the Remote Control 4 4 4 4 4 5 5 3.0 Connections 3.1 Connecting to TV Set 3.2 Connecting to Digital Audio Amplifier, DVD/Video recorder 5 5 5 4.0 First Time Installation 5 5.0 Basic Operations 5.1 Program 5.2 Video Setting 5.3 Channel Search 5.4 Time Setting 5.5 Option 5.6 System Setting 5.7 USB 6 6 7 7 8 8 9 9 6.
PART 1 • English 1. 0 Instruction 1.1 Safety Instructions This receiver has been manufactured to satisfy international safety standards. Please read the following recommended safety precautions carefully. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage with the inside of the product that may be of sufficient magnitude to constitute a risk of electric shock to persons.
3. The product does not operate normally despite following operating instructions. Adjust only the controls described in the operating instructions as improper adjustment of other controls could damage the product and require extensive repair word by a qualified technician. 4. The product has been dropped or damaged in any way. 5. The product exhibits distinct change in performance.
PART 1 • English 2. Your Receiver 2.1 PIN code default: 8888 2.2 Front panel Fig.
PART 1 • English English 27. 3/STOP Stops playback. 28. 0/REPEAT Repeats playback/stops repeat 29. RED Flexible functions in OSD MENU and Teletext 30. GREEN In no menu state changes resolution of HDMI output between 1080i, 720p and 576i; flexible functions in OSD MENU and Teletext. 31. YELLOW In no menu state changes aspect ratio and aspect conversion of Video outputs; flexible functions in OSD MENU and Teletext. 32.
PART 1 • English 5.0 Basic Operations 5.1 Program Press MENU and select Program using tu buttons. Press OK or q button to edit program settings. Press EXIT to exit the menu. 5.1.1 Program Edit To edit your programme preferences (lock, skip, favourite, move or delete), please go to Programme Edit. This Menu requires a password to access. Enter your password or use the default password '8888' if you did not change it.
PART 1 • English 5.1.2 EPG (Electronic Programme Guide) English The EPG is an on-screen TV guide that shows the program schedule for up to seven days in advance for every tuned channel. Press EPG to access the menu. Use pq to select the preferred programme. If there is more than one page of information, use the BLUE button for page up and the YELLOW button for page down. To view program schedule on other channels use tu buttons. To book reminder for desired event press OK button.
PART 1 • English Auto Search Search and install all channels automatically. This option overwrites all previously installed channels. 1. Select Auto Search and press OK or u to start channel search. 2. To cancel channel search, press EXIT. Manual Search Install new channels manually. This option adds new channels without changing the current channels list. 1. Select Manual Search then press OK or u. The channel search screen will appear. 2.
PART 1 • English OSD Language Select the preferred language of On Screen Display. Subtitle Language Select the preferred subtitle language. English Audio Language Select the preferred audio language for watching TV channels. If the language is not available, the default programme language will be used Digital Audio Select digital audio output mode PCM – audio from any format will be converted to PCM format RAW – audio from receiver will be send in original format OFF – digital audio output disabled 5.
PART 1 • English 5.7.1 Multimedia If there is no USB device plugged in, a warning message "No USB Device is Found" will be displayed. Otherwise you can select the Music, Photo, Movie or Recordings in this menu and press OK to enter the file browser and select the file to playback. Music supported file formats are MP3 and WMA. Photo supported file formats are JPG and BMP Movie supported video files in various formats (MPG, MPEG, TS, VOB, MP4, AVI,...)* Records to display list of recordings.
PART 1 • English Record Device If you have multiple partitions on your storage device – select one of them as default partition for recording. Format If you would like to format storage device or partition on it – select partition and file system to be used. Move focus to Format and press OK. You will need to confirm format by pressing OK button one more time. Format procedure will take some time, depends from size of storage device used. At the end of process “Format is complete” message will appear.
PART 1 • English Problem Possible cause After moving the receiver to another room you are no longer able to receive digital reception The aerial feed former new point may come through a distribution system which may reduce the digital signal now received by the box.
