Picture similar Digital Terrestrial HD Receiver SRT 8202 User Manual Manuel d’utilisation Používateľská príručka Uputstvo za upotrebu Instrukcja obsługi Ръkоводство за потребителя Manual de utilizare Руководство пользователя Посібник користувача Manual de utilizare
HOTLINE 0820 400 150 AT support_at@strong.tv 029 928 FR 0826 support_fr@strong.tv € 0,12/Min. österr. Festnetz € 0,15 par mn poste fixe en France 32 634451 BG +359 support_bg@strong.tv 199 404 032 IT support_it@strong.tv 1 445 26 10 CEE +36 support_hu@strong.tv Da rete fissa 24,8 cent. al min. 12,5 cent. scatto alla risposta Da rete mobile max 49 cent. al min. 15,6 cent. scatto alla risposta 501 49 91 DE 0180 support_de@strong.tv NL € 0,14/Min. deutsches Festnetz € 0,42/Min. max.
Licenses ANY USE OF THIS PRODUCT IN ANY MANNER OTHER THAN PERSONAL USE THAT COMPLIES WITH THE MPEG-2 STANDARD FOR ENCODING VIDEO INFORMATION FOR PACKAGED MEDIA IS EXPRESSLY PROHIBITED WITHOUT A LICENSE UNDER APPLICABLE PATENTS IN THE MPEG-2 PATENT PORTFOLIO, WHICH LICENSE IS AVAILABLE FROM MPEG LA, LLC, 6312 S. Fiddlers Green Circle, Suite 400E, Greenwood Village, Colorado 80111 U.S.A.
Table of Content 1.0 Introduction 1.1 Safety Instructions 1.2 Storage 1.3 Equipment Set-up 1.4 Accessories 1.5 Usage of external USB devices 2.0 Your Receiver 2.1 DEFAULT PIN: 1234 2.2 Front Panel 2.3 Rear Panel 2.4 Remote Control 2.5 Installing the batteries 2.6 Using the remote control 3.0 Connection 3.1 Connecting to a Terrestrial Antenna 3.2 Connecting to TV with HDMI cable 3.3 Connecting to TV with SCART cable 3.4 Connecting to a Digital Audio Amplifier with S/PDIF 3.
1.0 Introduction 1.1 Safety Instructions DO NOT INSTALL YOUR RECEIVER: In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a surface which might obstruct the ventilation slots.
1.3 Equipment Set-up The installation of your receiver does not require any special skills and can be done by yourself, as described in chapter 4. In this case, please follow the instructions. Refer to the user manual of your TV. Make sure that the HDMI cable is in a good condition. Connect one end of a good quality HDMI cable to the HDMI output on your receiver and the other end to the HDMI input of your TV. If you use TV SCART connection, use then well shielded SCART cable.
2.0 Your Receiver 2.1 DEFAULT PIN: 1234 2.2 Front Panel 1. IR sensor Point your remote control towards this sensor. 2. 4 digits display Indicates current time in STANDBY mode. Indicates current channel number in OPERATING mode 3. Mode indicator RED indicates that the receiver is in STANDBY mode. GREEN indicates that the receiver is in OPERATING mode 4. USB Connector for USB storage devices. Fig. 1 2.3 Rear Panel Fig. 2 1. ANT IN To connect to your antenna for reception of broadcasted signals. 2.
11. OK Menu Off: Displays the current channel list. Menu On: Activates the highlighted menu item. 12. RECORD Records the TV programme to the connected USB storage device 13. TIMESHIFT Activates the Timeshift function (Off/On) 14. 0~9 Enters a channel number in viewing mode or a value inside the respective menu 15. EPG Opens the EPG (Electronic Programme Guide) in TV mode 16. RECALL Back to previously watched channel 17. AUDIO Opens the audio language selection 18.
3.0 Connection 3.1 Connecting to a Terrestrial Antenna Fig. 6 To receive broadcasted signals, your terrestrial indoor or outdoor antenna must be connected to the ANT IN connector on the back of the receiver. Use a properly shielded antenna cable and suitable connectors. The ANT OUT connector allows you to loop the antenna signal to a second receiver or TV set. Please consider that the looped signal might be too weak if you use an active antenna.
3.6 Connecting to an analogue Audio Amplifier Fig. 7 Use a good quality cable with 3.5 mm jack to connect your receiver to the analogue input of your Hi-Fi audio amplifier for achieving best possible analogue audio quality. 3.7 Connecting a USB storage device Fig. 8 Connecting a USB device to the unit allows you to playback multimedia files. See chapter 7.5. Media Player. Note It is recommended to use USB 2.0 storage devices or higher for recording and play back of TV programmes or HD movies.
When all settings have been made, move the highlight to OK and press OK to continue. The receiver will now advance to the Aerial Adjustment screen. This part of the wizard is of great help when setting up your antenna system. Use pq to move the highlight to the setting you wish to alter and use tu to change values. The following settings are available: Antenna Power: Before connecting your antenna to the receiver, please read the user manual of your antenna regarding antenna powering.
6.1.2 Channel list Press OK in viewing mode to display the Channel List. Use pq in the channel list to highlight your channel of choice and press OK once to select the highlighted channel. Press OK again to leave the channel list mode. Inside the channel list it is possible to use the PG+/PG- buttons as well in order to scroll page-wise through the list. TIP Use tu to toggle between the All Channel list and favourite list(s) or press FAV in viewing mode for a list of the available favourite lists. 6.1.
To activate this function, set the Timeshift mode in the DVR Setting menu to on by selecting Pause. For details, see 7.5.6. Press 2 in viewing mode to activate Timeshift. The progress information banner appears on screen. Live TV keeps playing for moment and will then pause. Press u to resume Timeshifted playback. Press 3 to return to live TV. Note Timeshift and its playback only work properly when a fast USB storage device such as a USB2.0 HDD is connected to the receiver.
7.1 Edit Channel Use pq to select Edit Channel and press OK or u to enter. Use pq to highlight the submenu of choice and press OK to select. Press EXIT or LEFT to get back to the main menu. 7.1.1 TV Channel List In the Edit Channel menu select TV Channel List with pq and press OK to enter. Use tu to change the channel group (if you have already set up favourite groups). Select the channel of choice with pq. Press OK to view the selected channel in the preview box. 7.1.1.
7.1.1.5 Editing channels The Edit function allows you to Sort, Rename or Delete channels. To enter the Edit menu, press BLUE while in TV Channel List. The Edit Channel menu will appear. If you made changes in the previous menu, but haven’t saved them yet, you will be asked to do so now. Sort Press RED to enter the Sort menu. Use pq to select sorting method and press OK to confirm. Possible methods are: Name (A-Z): Sorting in alphabetical order from A to Z.
Use pq to select Rename Favourite List from the Edit Channel Menu and press OK to proceed. The names of all groups are now displayed. Select a favourite group with pq and press OK to edit its name. A text field will now pop up at the right of the screen. Use tu pq to select characters and enter them with OK. When you have finished editing, press BLUE to save the changes. When all changes have been made, press EXIT twice to leave this menu. 7.2 Installation 7.2.
NOTE Before connecting your antenna to the receiver, please read the user manual of the antenna regarding antenna powering. This parameter is recommended to set to On only for active internal or external antennas which require power supply via antenna cable with voltage of 5 V DC and consume less than 50 mA. Otherwise, leave it Off. 7.2.
Aspect Mode: Use this option to select the aspect ratio of your TV and the preferred conversion method. The options are: Auto (automatic detection of aspect ratio), 4:3 PS (Displays 16:9 widescreen broadcasts full screen on your 4:3 TV), 4:3 LB (black bars on top and under the picture on a 4:3 TV) and 16:9 (use this setting for 16:9 TV sets). Connection: Use this option to select the connection to your TV set. Select HDMI or TV SCART.
Wakeup Date: Use the 0~9 buttons to enter the date for the timed event. Wakeup Time: Use the 0~9 buttons to enter the starting time. Duration: Use the 0~9 buttons to enter the duration of the timer. When all settings have been made, use pq to move the highlight to Save and press OK to confirm. To quit the timer without saving your settings, move the highlight to Cancel. 7.3.5 Parental Lock This menu allows you to protect the installation menu and/or channels with a PIN code.
7.4.1 Information This submenu shows receiver specific information such as hardware version and software version. It also displays our web address www.strong.tv. Please have the Information screen on hand when you call our hotline. The person who answers your call might ask for the information given in this screen. 7.4.2 Load Factory Settings This option allows you to reset the receiver to factory settings, which clear all stored channels.
These functions allow playback of different kind of files from the connected USB storage device. In the Media Player menu select required option and press OK to enter a submenu. When entering a submenu, the highlight is on the USB storage device. Press q and then OK to open the directory respectively its folders/subfolders. Use pq to select a file or folder and then press OK to open the folder/subfolder (if applicable) or start playback of the file. Press the EXIT button to exit.
7.5.4 Image 4: Press 4 to open a previously created play list. Then you can select the image file that you want to add your play list by pressing 5 (a single file will be added to the play list) or 6 (all files of this directory/folder will be added to the play list). 5: Press 5 to add a file to the play list. A favourite icon will be shown next to the file. 6: Press 6 to add all files of this directory/folder to the play list. Press 6 again to delete all files from the play list.
3 0 sec to 30 min. Set the time step you like to jump forward to by pressing 4 during playback of recorded files. This only works when the info banner is displayed on screen. If it is not, press INFO. Time Shift to Record: If set to On the timeshifted part will be included into your recording when you start to record the current programme. PS Record: Select between On or Off. When Off is selected, recordings will also include subtitles and Teletext (when available).
Problem Possible cause What to do No picture or sound on TV or amplifier HDMI or SCART is not selected on your TV or amplifier or the unit is set to higher resolution as the TV supports. TV/amplifier is not switched on Switch to correct TV/amplifier input Select lower resolution on receiver Switch TV/amplifier on. Check if S/PDIF connection is used.
9.0 Technical Specifications Demodulator Demodulator: QSPK, 16/64/256 QAM DVB-T (EN 300 744), DVB-T2 (EN 302 755) Transmission mode: 1K, 2K, 4K; 8K, 16К, 32К normal and extended Guard intervals: DVB-T = 1/32, 1/16, 1/8, 1/4; DVB-T2 = 1/128, 1/32, 1/16, 19/256, 1/8, 19/128, 1/4 Video Decoder Profile level: MPEG-2 MP@ML, MP@HL, MPEG-4 H.
Connectors ANT IN - IEC Female ANT OUT - IEC Male TV SCART (RGB, CVBS, Audio L&R) HDMI S/PDIF (coax.) 3.5 mm stereo audio jack (audio left/right) USB 2.0 port: 5 V/800 mA (max.) supported General Data Supply voltage: Power consumption: Power consumption in standby: Operating temperature: Storage temperature: Operating humidity range: Size (WxDxH) in mm: Net-weight: 220 - 240 V AC (SMPS), 50/60 Hz 4.45 W (typ.), 12.00 W (max) max. 1.