Operation Manual

10
4.3 Channel Search
In this menu you can select a channel with signal to adjust your antenna for max signal en reception
n Select “MUX” to choose a channel to test signal strength. Enter the channel number with the
numeric keys on the remote control. Press the q button for next step.
n Select “Frequency” to manually enter a frequency to test signal strength. Enter the frequency
using the numeric keys on the remote control. Press the q button for next step.
NOTE: the bandwidth changes automatically
n Press OK to start scanning process.
The channel search progress will be shown on screen.
When the search is done and all channels have been found, a list of favorite networks will be shown and
you have to select your favorite network.
After this the receiver will automatically switch to the first channel in the list.
5.0 MAIN MENU
In the Main Menu you find Channel manager, Installation, Timer and Information.
5.1 Channel manager
1. Press MENU button to go to the Main Menu
2. Manage Channels
Press OK to choose sub menus and pq to choose between the submenus. OK to confirm.
a. Sort Channels
n Press RED ”Sort” to see the options for automatic sorting of the channels.
n Press GREEN ”Move” to move the chosen channel. You choose the channel you want to move
with OK and insert with OK
n Press YELLOW ”Save” to save the list.
n Press BLUE ”Save&Exit” to save the list and exit.
b. Add to favorites
n Choose channel with pq and favorite list with arrow tu. Confirm with OK.
n Press YELLOW ”Save” to save the favorites.
n Press BLUE ”Save&Exit” to save and exit.