Operation Manual

7
batteries. Do not mix new and used batteries otherwise the operation lifetime will be much shorter than
normal. Remove the batteries if the unit will not be used for a prolonged period of time.
The remote control transmits a directional infrared beam. Be sure to aim the remote control directly
at the infrared sensor of the unit during operation. If the sensor has been covered, the sensor will not
respond. The sensor may not able to receive the remote signal when it is exposed to direct sunlight
or a strong artificial light (fluorescent or strobe light). In this case, change the direction of the light or
reposition the unit to avoid direct lighting.
BE ENVIRONMENTALLY FRIENDLY
Do not dispose batteries as normal rubbish. Please dispose batteries following the Government’s regulation.
1. Switch to ON/STANDBY mode
2. 0 ~ 9 Enter numeric values and to select
the channel directly by entering it’s
number
3. FAV Opens Favorite List
4. TEXT Opens Teletext
5. EPG Opens Electronic Program Guide
Menu
6. EXIT Exit from menu
7. RED Various functions
8. GREEN Various functions
9. YELLOW Various functions
10. BLUE Various functions
11. MENU Opens menu
12. P+ / P- Channel Up/Down
13. VOL+ / VOL- adjust volume
14. OK BConfirms a choice
15. MUTE
16. i Press for present channel
information
17. AUDIO Choose audio: Left/Right/Stereo/
Mono
18. pq UP/Down
19. tu Left/Right
20. TV/RAD Change between Radio and TV
21. SUB Subtitle menu
22. OPT No function