Active Indoor Antenna SRT ANT 12 ECO User Manual Mode d’emploi Bedienungsanleitung Manuale d’uso Manual de uso Bruksanvisning Használati kézikönyv Uživatelský manuál Instrukcja obsługi Uputstvo za upotrebu Руководство пользователя
PART 1 1 1 2 2 3 1.0 INTRODUCTION Thank you for purchasing the STRONG SRT ANT 12 ECO DVB-T/T2 antenna. This antenna has been specially designed to receive digital terrestrial signals from the air. It can be connected to any Digital Terrestrial Receiver (DVB-T/T2), and is designed for indoor use only. This DVB-T antenna is an “Active type” antenna, it has a built-in low noise amplifier that amplifies the received signals for better performance.
PART 1 3.0 SAFETY NOTES Use only originally supplied accessories. Before you make any connections: disconnect your equipment from the 230 V main power to avoid electric shocks during installation. Short circuit in the coaxial cable MAY permanently damage your Digital Receiver. Never install the antenna outside your house or in humid rooms such as bathrooms. Never use AC adaptors with wrong specifications, this MAY permanently damage your antenna or Digital Receiver.
English PART 1 1. AC Outlet 2. Adaptor (230 V AC/12 V DC) 3. Antenna (Rear View) Standing (Vertical) 4. TV 5. Coaxial cable 6. HDMI or SCART cable (optional) 7. Digital Terrestrial Receiver DVB-T/T2 5.0 INSTALLATION OF THE ANTENNA A: To power the antenna with Digital Terrestrial Receiver 1. Turn on your TV set and turn on your Digital Terrestrial Receiver. 2. Press the “MENU” button on the remote control of your Digital Terrestrial Receiver.
PART 1 B: To power the antenna with extra power adaptor 1. Use this installation if your Digital Terrestrial Receiver does not support an active antenna. 2. Connect the supplied power adaptor to the “DC IN” connector on the back of the antenna. 3. Proceed with positioning the antenna as described above in section A (points 3, 4, 5). NOTE: The antenna will not function properly if the built-in amplifier is not powered.