Operation Manual
English
PART 1
1.0 INTRODUCTION
Thank you for purchasing the STRONG SRT ANT 15 ECO DVB-T/T2 antenna. This antenna has been specially
designed to receive digital terrestrial signals. It can be connected to any Digital Terrestrial Receiver (DVB-T/
T2), and is specially designed for outdoor use. The antenna housing is UV protected and weather-proof
sealed. With the supplied multi-functional mounting material you can install the antenna on a wall, on your
balcony or on a pole outside the house.
This DVB-T/T2 antenna is an “Active type” antenna, it has a built-in low noise amplier that amplies the
received signal for better performance. The antenna therefore needs 5 V power supplied by your terrestrial
receiver, or by an AC adaptor (supplied with the antenna).
We recommend that you carefully read this user manual before you install the antenna. This will help you
to get the best performance out of your antenna.
Specications
Frequency range: VHF 47 ~ 230 MHz, UHF 470 ~ 870 MHz
Gain: 45 dB for VHF and UHF
RF Output Impedance 75 Ohm
Power Supply:
2 powering methods:
5 V DC/40 mA via ANTENNA connector of the digital terrestrial
receiver or
12 V DC/250 mA via External 230 V AC to DC adaptor with power
injector
Special features
Choice of installation methods: wall-mounted or pole-mounted
installation
Built-in VHF/UHF and FM lter
Weather-proof and UV protected housing
Built-in low noise amplier technology
Highly directional to optimise accurate pointing to the transmitter
and to reduce pick up of unwanted signals
TABLE OF CONTENTS
1.0 INTRODUCTION 1
2.0 PACKAGE CONTENTS 2
3.0 SAFETY NOTES 2
4.0 CONNECTING THE ANTENNA 3
5.0 INSTALLATION OF THE ANTENNA 5