Operation Manual

PART 1

You can x the antenna on the wall, on the balcony or on a metal pole.

5.1 Installation on the wall

1. Take the multi directional base and hold it to the position on the wall

2. Mark the 4 holes with a pencil

3. Drill 4 holes with 5.8 mm diameter (make sure you are in a secured position and wear

sucient protective clothing while drilling)

4. Insert the 4 plastic plugs into the drilled holes

5. Hold the multi directional base on its position

6. Use the 4 screws to x the plastic mount on the wall

Fig. 6

5.2 Installation on a metal pole, or on the balcony

1. Take a metallic pole and make sure it is properly xed and stable enough to carry the

antenna

2. Take the pole mounting kit

3. Hook the 2 U bolts on the pole (or on the metal parts of the balcony)

4. Take the multi-directional base and place it over the bolts

5. Use the 4 wing nuts to x them

Fig. 7