Operation Manual

PART 1 • English
11
English
5.3 Installation
5.3.1 System Setting
In this menu, you can configure the system settings Language, TV Settings, Country, Channel
Numbering, Antenna Power, Time Settings, and Factory Default.
5.3.1.1 Language
You can change the language of the OSD and Audio.
Press UP/DOWN to select the OSD Language or Audio language.
Press OK/RIGHT to enter the language list and Press UP/DOWN to select the language. Press OK
to confirm.
5.3.1.2 TV Settings
You can set TV Standard, TV Format and Video Output.
n TV Standard
Press
OK/RIGHT to select PAL or NTSC and OK to confirm. If you don’t know which
standard your TV has, please select AUTO.
n TV Format
Press
OK/RIGHT to select 4:3 or 16:9, and OK to confirm.
n Video Output
Press
OK/RIGHT to select CVBS or RGB, and OK to confirm
5.3.1.3 Country
Press OK/RIGHT to select your country, press OK to confirm. If your country is not in the list, select
Other. It will apply the most common frequency plan for European countries.
5.3.1.4 Channel Numbering
Here you can set the channel list by different number format: Appearing order or Operator defined.
5.3.1.5 Antenna Power
Press OK/RIGHT to select turn OFF or ON the antenna power, press OK to confirm. Before setting
the Antenna Power to ON: make sure your antenna is ACTIVE, requires power 5 V DC and it’s
power consumption is not more then 100 mA.