Operation Manual

PART 1 • English

English

Delete satellite

If you want to delete a satellite, press the YELLOW key. Then warning message will appear. Select

OK and press the OK key to conﬁrm.

5.2.2 Auto Scan

Press the GREEN key to set the scan mode to Free or Free+Scrambled. If mode is Free then only “Free

to Air” channels will be added to the channel list. If mode is Free+Scrambled then all channels from

selected satellite will be added to the channel list.

Press the YELLOW Key to set the Blind Scan to ON or OFF. Blind scan function is useful to scan

new added satellite, but scan may take long time.

Press the BLUE Key to set the scan type to NIT OFF or NIT ON while Blind Scan is set to OFF and

to Quick Search or Detail Search while Blind Scan is set to ON.

When the set-up is completed, press the RED key to start the scan, shown as below.

5.2.3 Manual Scan

In this menu, you can scan single transponder, add a new transponder, edit the transponder or

delete the transponder.

You can switch between satellites with the

RED button,

Scan transponder:

Use UP/DOWN buttons to select the transponder. Press OK button to start scan.

Add Transponder:

In this menu, you can add a new transponder to the system. Press the GREEN button, the Add

Transponder sub-menu will appear.

Frequency: input the frequency of the new transponder.

Symbol Rate: input the symbol rate of the new transponder.

Polarity: Select the Polarity of the new transponder.

Edit Transponder

In this menu, you can edit a transponder in the system. Press the YELLOW button, the Edit

Transponder sub-menu will appear. This menu is similar to Add Transponder

menu.

Delete Transponder

Press the BLUE button to delete a transponder. You will need to conﬁrm operation.

Press LEFT/RIGHT to select OK, press the OK button to conﬁrm.

5.3 System setting

In this menu, you conﬁgure the system, such as Language Setting, OSD style, Parental Control, TV

Settings and Time Setting.