Operation Manual

PART 1 • English

English

move menu focus to selection of group. Use LEFT/RIGHT buttons to select group of your choice.

Select group “NO FAV” and press OK if you wish to exit from favourite channel list mode.

6.5 Selection Audio Language

Press the AUDIO button on the remote control to select the audio language. Select the Audio

Channel or Sound mode with UP/DOWN buttons. Select Audio channel number or Sound mode

(Stereo, Left or Right channel). Press OK to conﬁrm your selection. Your selection will be memorized

for current channel. Receiver will play last selected audio track every time when you select this

channel in future.

NOTE: Audio track with “(AC3)” sign can be listened only if receiver is connected to digital audio

ampliﬁer and ampliﬁer is

ON.

6.6 TELETEXT function

From normal view mode press TEXT. In TEXT on OSD: Press UP / DOWN to add / subtract

displayed page number. Press the

Numeric keys to input the page directly and

6.7 Subtitles function

From normal view mode press SUB button. If channel has subtitles information the Subtitles

language selection menu will appear. Use

LEFT/RIGHT buttons to select between DVB and Teletext

subtitles. Use UP/DOWN to select subtitles language. Press OK to conﬁrm your selection.

A.1 TROUBLESHOOTING

There may be various reasons for the abnormal operation of the receiver. Check the receiver

according to the procedures shown below. If the receiver does not work properly after checking it,

please contact the dealer. Don’t open the receiver cover. This may cause a dangerous situation.

Symptom Cause Remedy

The display on front panel

does not light up.

The power cord is not plugged

in.

Check that the power cord is

plugged in to the wall outlet.

No picture or sound Wrong connection of the

Audio/Video output of the

receiver to TV.

Connect the Audio/ Video

output of the receiver to TV

correctly.

Audio muting. Press the Mute button

TV power off. Turn TV on.

No picture The receiver can’t receive the

signal

Check the antenna cable,

replace the cable, or connect

the cable to the receiver

tightly.