Operation Manual

29
ENGLISH
www.strongsat.com
❖ Switching between digital satellite TV and
terrestrial TV
If your TV automatically shows digital satellite TV whenever your set-
top box is switched on, you can use your remote control to switch
between digital satellite TV and terrestrial TV.
This is also useful if you are using your VCR, for example to record a
digital channel, but you want to watch a terrestrial channel.
◆ To switch between digital satellite TV and terrestrial TV, press the
red colour button on your remote control. (Please do not press
the S button - this will switch your set-top box off.)
❖ Error messages
If there is a temporary problem with a channel you are watching, you
may see an error message on your TV screen. If this happens, you can
still change channel, in the usual way, to a channel that is not
experiencing problems.
Note
In order for this feature to work, your digital set-top box must be
connected to your TV via a SCART lead, and your TV must also be
receiving the terrestrial channels from your TV aerial. For information
about connecting up, see pages 10 to 12.
Some TVs may not allow you to use this feature.
Extra information