Operation Manual

3
ENGLISH
www.strongsat.com
Thank you for choosing the Pace set-top box for Viasat. Please follow
the instructions in this User Guide carefully to enjoy all the advantages
of digital satellite TV. We advise following the user instructions and
recommendations supplied with your set-top box, especially for first-
time use.
Your set-top box fully complies with international DVB (Digital Video
Broadcasting) standards.
❖
Updates to your set-top box
From time to time, your set-top box may be updated. These updates
provide enhanced features; new screens and menus may become
available. Although any new screens and menus may look a little
different from those described in this User Guide, you should be able
to use the same techniques (e.g. highlight and select) with them.
Updates will usually happen in the middle of the night. You should not
unplug your set-top box at the mains, as this may affect any updates
which may occur.
❖
Inserting the batteries in your remote
control
Before you can use your remote control, you must insert the two
supplied AAA batteries as follows:
1. Push the catch at the top of the remote control battery cover
down, then lift off the cover.
2. Insert the batteries as shown below. Be sure to match the + and
– marks on the batteries to their respective marks inside the
battery compartment.
3. Replace the battery cover, by inserting the tab at the bottom of
the cover first, then pushing the cover into place.
✘ Don’t leave flat batteries in your remote control.
✔ Replace both batteries at the same time.
✔ Dispose of flat batteries in an environmentally-friendly way.
Welcome to digital satellite TV!