Operation Manual

32 www.strongsat.com
Setup
To manually search for channels:
1. On the settings menu, highlight ‘Manual Scan’, then press
OK.
The Manual Scan screen appears.
2. Highlight the ‘Satellite’ line, then press
L or R to select the satellite that you
want to search.
3. Press
U or D to highlight each item you
want to change, then use the number
buttons or L and R to enter the values
you want.
4. Repeat steps 2 and 3 to change the
details for other satellites, if required.
5. To start the search, press
OK.
A progress screen displays to confirm that the search is taking place.
When the search is complete, a screen displays to tell you the number of TV and
radio channels that your set-top box has found.
6. To confirm these channels and redisplay the settings menu, press
OK.
To automatically search for all free-to-air channels:
1. On the settings menu, highlight ‘Automatic Full Scan’, then press
OK.
The Automatic Full Scan screen appears.
2. Press
L or R to select the satellite that
you want to search.
3. To start the search, press
OK.
A progress screen displays to confirm that the
search is taking place.
When the search is complete, a screen
displays to tell you the number of TV and
radio channels that your set-top box has
found.
4. To confirm these channels and redisplay the settings menu, press
OK.