Operation Manual

33
ENGLISH
www.strongsat.com
Viewing set-top box information
You can view technical information about your set-top box.
To display the information:
1. On the Setup menu, highlight ‘Decoder information’, then press
OK.
2. To redisplay the Setup menu, press
back.
Restoring the factory settings
If you wish, you can restore all your set-top box’s factory-preset settings.
Note
If you restore your set-top box’s factory settings, you will need to redo the country selection
and search for channels - see page 13.
The items that are restored, and what they will be restored to, are shown below.
Setting Factory setting
Menu/banner language English
Audio language English
Subtitle language English
Volume level MAX
TV screen format 4:3
Video signal type RGB
RF out channel 38
Audio compression type MPEG
To restore the factory settings:
1. On the Setup menu, highlight ‘Restore factory settings’, then press
OK.
2. A message displays asking you to confirm you want to restore the factory
settings. If you are sure you want to do this, press
OK. If you do not want to
restore the factory settings, press back.
3. Press
OK. The Countries screen appears (see page 12).
4. Select the country and search for channels as described on pages 13 and 14.
❖
❖
Setup