Operation Manual

3
ENGLISH
www.strongsat.com
Welcome to digital satellite TV!
Updates to your set-top box
From time to time, your set-top box may be updated. These updates provide
enhanced features; new screens and menus may become available. Although any new
screens and menus may look a little different from those described in this User Guide,
you should be able to use the same techniques (e.g. highlight and select) with them.
Updates will usually happen in the middle of the night. You should not unplug your
set-top box at the mains, as this may affect any updates which may occur.
Inserting the batteries in your remote control
Before you can use your remote control, you must insert the two supplied AAA
batteries as follows:
1. Push the catch at the top of the remote control battery cover down, then lift off
the cover.
2. Insert the batteries as shown below. Be sure to match the + and – marks on
the batteries to their respective marks inside the battery compartment.
3. Replace the battery cover, by inserting the tab at the bottom of the cover first,
then pushing the cover into place.
8 Don’t leave flat batteries in your remote control.
4 Replace both batteries at the same time.
8 Do not dispose of used batteries with your domestic rubbish.
4 Used batteries should be recycled at the end of their useful life.
❖
❖