Operation Manual

5
ENGLISH
www.strongsat.com
Your set-top box
ir receive
message
online
standby
epg
back
OK
menu
Digital Satellite Receiver
6752
epg button
To display the Viasat epg
(electronic programme guide)
remote control sensor
Window that receives the signal from
your remote control (do not block)
menu button
To display the main menu
back button
To remove a menu
and go back up to the
previous screen
smart card slot
To insert your smart card
L, R, U, D and OK buttons
S button
To switch your set-top box into or out of standby
standby light
Lights up red when your set-top box is in standby
Lights up green when your set-top box is out of standby
Lights up orange if your set-top box is on but is not
receiving a signal from the satellite
online light
Lights up green when your set-top box is
connected to the network via your telephone line
message light
Lights up yellow when there is a message waiting.
Flashes yellow when it is an important message
ir receive light
Lights up red when your set-top box is receiving a
signal from your remote control
Front panel❖
Rear panel connectors overview
Full details about connecting up and installing your set-top box begin on page 6.
❖
TV SCART
VCR SCART
S/PDIF TO TV
INC. MODULATOR
ANT IN
13/18V DC
350mA max.
SAT IN
AUDIO
Supplied by Strong & Co. Japan
AC 230V 50Hz
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION When servicing use only identical replacement par ts
TO TV
To connect an RF lead to your TV (or VCR)
SAT IN
To connect the lead
from your satellite dish
ANT IN
To connect the lead from your
TV antenna
S/PDIF
To connect to a digital-optical
audio input on your home cinema,
TV, video recorder or stereo
sound equipment
To connect the telephone lead
AC 230V 50Hz
Do not connect the mains plug to the wall socket
until you have made ALL the other connections
VCR SCART
To connect to the
SCART connector
on your VCR
TV SCART
To connect to the
SCART connector
on your TV
AUDIO L + R
To connect stereo-audio
phono leads to your TV,
video recorder or stereo
sound equipment
WARNING
Always disconnect your set-top box from the mains supply before you connect it to
(or disconnect it from) any other equipment.