Operation Manual

8 www.strongsat.com
Installation
1. Use the supplied SCART lead to connect your set-top box to your TV.
2. Use a SCART lead (not supplied) to connect your set-top box to your VCR.
3. Connect the lead from your satellite dish to the satellite input connector
(marked SAT IN) on your set-top box.
The RF connection is not required for digital satellite TV. However, you may wish to
connect RF leads as shown, to continue to view or record terrestrial TV from your TV
antenna.
You must then connect the lead from your TV antenna to the antenna input
connector on your VCR.
Connection method 1: To TV and VCR
If you have a VCR with a SCART connector and a TV with a SCART connector, you
can connect up as shown in the diagram below.
❖
TV SCART
VCR SCART
S/PDIF TO TV
INC. MODULATOR
ANT IN
13/18V DC
350mA max.
SAT IN
AUDIO
Supplied by Strong & Co. Japan
AC 230V 50Hz
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION When servicing use only identical replacement parts
Supplied RF lead
Lead from your
TV antenna
Supplied
SCART lead
Lead from your
satellite dish
SCART lead
(not supplied)
TV OUT
ANTENNA
IN
VCR
TV
IN
ANTENNA IN
IN