Product Manual

Page 7 of 14
2. Pull the lock pin out from the frame.
3. Before operation, open the release valve by turning the hand-wheel counter-clockwise. Expand
the jack with the hand-wheel to place the rollers around the tire; position the jack so both rollers
are in contact with the tire tread. To obtain the best control of the jack while expanding the rollers
around the tire, place your left hand on top of the left side axle and place your right hand at the
center of the pedal. Close the release valve by turning the hand-wheel clockwise to a snug and
tight position. The jack may now be used.