17-Bin Wire Shelf Storage Rack Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This 117-Bin Wire Shelf Storage Rack is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use This 117-Bin Wire Shelf Storage Rack with versatile storage bins can be used in the shop, garage, home and virtually anywhere. The storage rack has a strong powder coating finish and can assemble easily. The bins are made of durable Polypropylene material. Technical Specifications Property Capacity Per Small Bin Capacity Per Shelf Small Bin Dimensions, L x W x H Shelf Dimensions, L x W Rack Dimensions, L x W x H Specification 2 lbs. 100 lbs.
⚠CAUTION STORAGE RACK USE AND CARE Do not force the storage rack. Products are safer and do a better job when used in the manner for which they are designed. Plan your work, and use the correct product for the job. Check for damaged parts before each use. Carefully check that the storage rack will operate properly and perform its intended function. Replace damaged or worn parts immediately. Never operate the storage rack with a damaged part. Store the storage rack when it is not in use.
STEP 2 Place the SHELF (A) on its side and slide the (4) BOTTOM POLES (C) through the corner cylinders of the SHELF (A). Make sure that the SHELF (A) corner cylinders are positioned over the SLIP SLEEVES (E). Take 2 SCREWS (F) and put them through the bottom of the BASE (D), the side with the feet levelers, and fasten them to BOTTOM POLES (C). Tighten the SCREWS (F) with the ALLEN KEY (G). Repeat with the other BASE (D).
STEP 6 Starting with lowest position, install the next set of SLIP SLEEVES (E) on (4) TOP POLES (B). Place another SHELF (A) over the poles and secure the SHELF (A) so the top of the SLIP SLEEVES (E) are flush with the top of the corner cylinders on the SHELF (A). Repeat until all shelf positions on the TOP POLES (B) have a SHELF (A). The Feet Levelers are already screwed into the BASE (D) and you can adjust as needed to ensure your shelving rack is level. STEP 7 Place (9) BINS (H) onto each SHELF (A).
Parts Diagram A B C D E F G H Parts List Reference A Part Number PBK-03-014-3910 B PBK-04-013-3325 C PBK-04-015-3325 D PBK-13-004-1600 E XBK-01-012-1936 F ZBK-01-002-0635 G XXX-97-001-0001 H XBL-21-006-0403 Part Description Quantity SHELF 14 TOP POLE 4 BOTTOM POLE 4 BASE 2 SLIP SLEEVE End Cap (4) and Pole Connector (4) are pre-installed Feet Leveler (4) are pre-installed 112 SCREW 4 HEX KEY 1 BIN Remark 117 Blue Replacement Parts For replacement parts and te
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.