200-Lb. Rapid Lift Hydraulic Table Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This hydraulic table is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use This Strongway 1200-Lb. Rapid Lift Hydraulic Table is a hydraulic scissor-lift table with an easy-foot pedal operation. It’s ideal for lifting, positioning, and transporting heavy materials around the shop, factory, warehouse, or office. Technical Specifications Property Load Capacity Raised Height Lowered Height Platform Size L x W Overall Dimensions L x W x H Specification 1200 lb.
and contact will cause electrical shock. Keep children and bystanders away from the work area while operating the tool. Do not allow children to handle the product. Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your work area. Some of these hazards may be hidden from your view and may cause personal injury and/or property damage if contacted.
Keep guards in place and in working order. Never operate the product without the guards in place. Do not leave the table running unattended. Specific Operation Warnings ⚠WARNING To prevent serious injury or property damage, read and understand owner’s manual before use. Do not exceed the rated load capacity. Be aware of dynamic loading. Sudden load movement may briefly create excess load causing product failure.
Assembly Instructions ⚠WARNING The table is very heavy. Two people are needed to lift it out of the box. The table arrives nearly assembled but will require some assembly. 1. Assemble the handle. Slide the ends of the handle into the handle slots on the base and secure with a hex bolt. 2. Install the foot pedal. Insert the pump lever (38) into the connecting rod and secure with a bolt. 3. Assemble the steel cable. Press the lifting pedal several times until the table reaches the desired position.
Attach the steel cable to the bottom with a pin: Adjust the steel cable to the desired position with the control lever. Before Each Use ⚠WARNING Inspect the general condition of the table. Do not use lift table if damaged. Replace damaged parts before resuming operation. Test the cart operation by using the foot pedal and control lever. Make sure the table raises and lowers properly before adding weight to the table. Before raising the table top, lock the casters.
product failure. When loading and unloading goods on the hoisted table, do not place goods unparalleled with the table top. Doing so may cause serious offset and make the cart turn over. Wear ANSI Z87.1 compliant safety goggles. Use only on flat, level, and hard surface capable of supporting the lift table and the rated load. Be aware of the “pinch points”. Keep hands and feet clear of lifting mechanism during operation.
After Each Use ⚠WARNING To prevent accidents, when finished using the table, move it to a safe location and lock the locking swivel casters. Lower the table as far as it will go. Clean and store the table indoors out of children's reach. For convenient storage, the handle can be folded down. To do this, press down on the locking bar, and then press down on the handle. Maintenance ⚠WARNING Store the table in a location where it is protected from moisture, dirt, and a corrosive atmosphere.
Troubleshooting ⚠WARNING If the table is not performing properly, you may need to bleed the air from the system. Use the table below to troubleshoot problems before contacting service personnel or your local dealer. If the problem continues after troubleshooting, call your local dealer for assistance. Failure Table fails to descend when first used. Control lever does not lower the table easily. Table is not performing properly.
Parts Diagram Parts List Reference 1 2 3 4 5 6 7 8 9 10 11 12 13 Part Description Protective Mat Scissor Arm Spring Roller Pin Spring Pin Handle Cable 1200 mm Control Lever Roll Pin Safety Bar Nut Page 12 of 15 Quantity 1 1 4 4 4 4 2 1 1 1 1 2 2
Reference 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 Part Description Table Jacket Hex Bolt Busher Pin Caster Nut Bearing Hex Bolt Washer Spring Washer Hex Nut Caster Rack Hex Bolt Foot Plate Brake Plate Hex Bolt Spring Washer Washer Retaining Ring Pin Pin Retaining Ring Pin Pump Lever Quantity 1 4 2 4 4 4 4 8 8 8 8 8 2 2 2 2 2 2 2 2 1 1 2 1 1 Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.com Made in China.
