40 00-Ft.W Wago on Hose Re eel Ca art Owne er’s Ma anual W WARNING: : Read and understand u a instruction all ns, warnings, and caution ns before using this producct. Failure to follow the insstructions, warnings, w and d cautions ma ay result in sserious perso onal injury and/or a property damage.
Thank you very much for choosing a Strongway product! For future reference, please complete the owner’s record below: Serial Number/LotDate Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. This 400 ft. hose reel cart is designed for certain applications only. The distributor cannot be responsible for issues arising from modification or use of this product in an application for which it was not designed.
Table of Contents Intended Use ..........................................................................................................................................4 Technical Specifications ......................................................................................................................4 Specific Operation Warnings ...............................................................................................................6 Assembly Instructions..................................
Inttended Use U This hosse reel cart has h a solid stteel frame, lo ong handle and flat-free tires for easyy maneuverability. The cartt, even with 400 4 feet of hose loaded, makes it eas sy for you to reach to anyywhere in your yard. Technical Speciffications s Capacityy Tires Construcction 40 00 feet (122 meters) of 5/8in.
WOR RK AREA SA AFETY Insp pect the workk area before e each use. Keep K the worrk area clean n, dry, free off clutter, and d well lit. Clutttered, wet, or o dark work areas can re esult in injury y. Do not n allow the e cart to come e into contacct with an ele ectrical sourcce. Contact w will cause ele ectrical shocck. Keep children an nd bystanderrs away from m the work arrea while ope erating the re eel. Do not allow child dren to opera ate the reel.
Sp pecific Operation O n Warnings Ensure that reel is properly installed and in good worrking order be efore conneccting input an nd put hoses outp Do not n pull or jerrk on hose. Do not n use the hose h reel with h any chemiccal or solid substance s tha at will damag ge the hose. Do not n operate the t cart or re eel if any partt is missing. Replace the missing partt before operrating. Failu ure to do so could result in a malfuncction and serious persona al injury.
Assembly Instructions 1. See Figure 1. Attach the rear bracket axle (B) to the U-shape frame (A) using two M10 x 20mm screws (M). Then, attach the front axle (C) to the frame (A) using two M10 x 20mm Screws (M). Figure 1 2. See Figure 2. Slide two flat-free tires (D) onto the front axle (C). Tighten with two 12mm lock nuts and washers (N). Next, slide two flat-free tires (D) onto the rear axle (B). Secure with one 16 washer (O) and one pin (P) on each side.
3. See Figure 3. Place the basket (I) on the top surface of the front axle (C) and rear axle (B) and secure with four M8 x 20mm screws and nuts (L). Figure 3 4. See Figure 4. Attach the hose reel wheels (E1&E2) to the drum (E3) using the M5 x 15mm screws and washers(Q).
5. See Figure 5. Place the assembled hose reel (E) onto the top of the frame (A). Ensure that the water inlet (with the bearing bracket) is on the same end of the cart as the front axle (C). Place the bearing bracket (F) onto the other end of the hose reel assembly (E) and secure using four M6 x 42mm screw, nut and washers (K). Figure 5 6. See Figure 6. Insert the crank handle (G) into the bearing at the rear of the frame (F).
7. See Figure 7. Connect the long handle (H) with the bar of the front axle with one M6 x 30mm screw and nut and washer set (J). Figure 7 8. See Figure 8. Attach the male coupling end of leader hose (R) to the water inlet coupling (E1) and tighten.
Before Each Use Ensure that the cart and hose reel are in proper working order before use. Inspect the cart fittings, alignment, hoses and components periodically. Have damaged or worn components repaired or replaced by an authorized technician. Operating Instructions Always release water pressure by leaving the hose nozzle OPEN when not in use. Be sure to have the water turned OFF and the nozzle OPEN before rewinding hose.
Parts Diagram Page 12 of 16
Parts List Part No. Description Quantity A B C D E1 E2 E3 F G H I R U-Shape Frame Rear Bracket Axle Front Swivel Operating Bracket Axle Tire Wheel With Brass Coupling Wheel With Crank Axle Drum Bearing Bracket Crank Handle Long Connecting Handle With Grip Basket Leader Hose 1 1 1 4 1 1 1 1 1 1 1 1 Part No.
Troubleshooting Problem Solution Water is leaking from a hose connection. Tighten the leaking connection. If necessary, check whether the threads are stripped or not. Water is leaking from the hose. Check the hose for damage. Repair or replace the hose. Hose is not retracting. Check that the hose is not stuck on an obstacle. Check both reel bearings for dirt or damage. If necessary, lubricate the bearings with 1 ml of silicone oil.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of seven years from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by Northern Tool and Equipment Company, Inc. Burnsville, Minnesota 55306 NorthernTool.