Product Manual

7. Before raising the vehicle double check and verify the saddle is centered and also has full contact with the

lifting point.

8. Pump handle to lift until saddle contacts load. Continue to pump the jack handle to lift the vehicle to the desired

height. After lifting, support the load with appropriately rated vehicle support stands before working on the

vehicle.

CAUTION: NEVER WIRE, CLAMP OR OTHERWISE DISABLE THE LIFT CONTROL VALVE TO FUCTION BY

ANY MEANS OTHER THAN BY USING THE OPERATOR'S HAND. USE THE HANDLE PROVIDED WITH THIS

PRODUCT OR AN AUTHORIZED REPLACEMENT HANDLE TO ENSURE PROPER RELEASE VALVE

OPERATION. DO NOT USE EXTENSIONS ON THE AIR HOSE OR ON THE OPERATING HANDLE.

LOWERING THE JACK

1. Raise load high enough to allow clearance for the jack stands to be removed, then carefully remove jack

stands.

2. Remove support stands.

3. Grasp the handle firmly with both hands. Securely hold on to the jack handle so your hands do not slip and

ensure the release valve does not rapidly lower.

4. Carefully open the Release Valve by slowly turning the handle counterclockwise. (Do not allow bystanders

around the jack or under the load when lowering the jack.