Product Manual

13
BEFORE USE
1. Before using this product, read the owner's manual completely and familiarize yourself thoroughly
with the product and the hazards associated with its improper use.
2. Perform the air purge procedure. (See previous instructions for system purge procedure.)
3. Inspect your jack before each use. Do not use if bent, broken or cracked components are noted.
OPERATION
All numbers in parenthesis () refer to the index number from the parts breakdown.
RAISING THE JACK
1. Before use, ensure the transmission weight and size does not exceed the capacity of the jack.
2. Ensure the vehicle from which the gearbox is to be removed is correctly positioned,
3. Check to ensure the handbrake is applied and raised to allow the transmission jack to be positioned
correctly.
4. Ensure there are no other persons around or under the vehicle.
5. Ensure saddle is in its lowest position and use handle to transport and centrally position jack
beneath vehicle transmission.
6. Close the release valve by turning it clockwise until it is firmly closed.
7. Pump handle to lift until saddle contacts load. Continue to pump the jack handle to lift the vehicle to
the desired height.
8. After lifting, support the load with appropriately before removing transmission.