Product Manual

14
LOWERING THE JACK
1. Ensure the load is supported before removing transmission. Check to make sure the transmission is
stable on the jack saddle and load is fixed in place before attempting to lift lower, or transport.
2. Grasp the handle firmly with both hands. Securely hold on to the jack handle so your hands do not
slip and ensure the release valve does not rapidly lower.
3. Carefully open the Release Valve by slowly turning the handle counterclockwise. (Do not allow
bystanders around the jack or under the load when lowering the jack).
4. Lower saddle to the lowest minimum height before attempting to transport load.
TRANSPORTING THE LOAD
1. Ensure the jack saddle is fully lowered and load is secure before attempting to lift, lower, or
transport transmission.
2. Transport the load over level and solid ground, preferably concrete, and ensure the floor is swept
clean before transporting load.
3. Be diligent in continually monitoring the load in transit. Keep all other persons at a safe distance.
4. DO NOT use this jack on asphalt, or any soft surface as jack may sink or tip, causing damage to
transmission; personal or injury/harm may result.