Product Manual

19
4. Position the jack on level ground.
5. Fill the oil case until oil level is just beneath the lower rim of the oil fill hole.
KEEP DIRT AND OTHER MATERIAL CLEAR WHEN POURING.
6. Replace oil plug.
7. Perform the Air Purge Procedure.
ADDITIONAL WARNINGS:
 DO NOT USE MOTOR OIL IN THE JACK.
 ONLY USE ANTI-FOAMING JACK OIL.
 ALWAYS USE A GOOD GRADE HYDRAULIC JACK OIL.
 DO NOT USE HYDRAULIC BRAKE FLUID, ALCOHOL, GLYCERINE, DETERGENT, MOTOR OIL OR
DIRTY OIL.
 USE OF A NON-RECOMMENDED FLUID CAN CAUSE DAMAGE TO A JACK.
 AVOID MIXING DIFFERENT TYPES OF FLUID AND NEVER USE BRAKE FLUID, TURBINE OIL,
TRANSMISSION FLUID, MOTOR OIL OR GLYCERIN. IMPROPER FLUID CAN CAUSE PREMATURE
FAILURE OF THE JACK AND THE POTENTIAL FOR SUDDEN AND IMMEDIATE LOSS OF LOAD.
 DISPOSE OF HYDRAULIC FLUID IN ACCORDANCE WITH LOCAL REGULATIONS.
Important: Use only a quality grade hydraulic jack oil. Avoid mixing different types of fluid and NEVER
use brake fluid, turbine oil, transmission fluid, motor oil or glycerin. Improper fluid can cause failure of
the jack and the potential for sudden and immediate loss of load.