Product Manual

2
Thank you very much for choosing a Strongway product! For future reference, please complete the owner’s
record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to
become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot be responsible for issues
arising from modification. We strongly recommend this machine not be modified and/or used for any
application other than that for which it was designed. If you have any questions relative to a particular
application, DO NOT use the machine until you have first contacted the distributor to determine if it can
or should be performed on the product.
For technical questions please call 1-800-222-5381.
INTENDED USE
This 1000-LB. transmission Jack for is designed for transmission installation and removal. Universal
mounting head provides a wide fore and aft tilt range. Manual operated hydraulic system that includes a
bypass system to prevent over-extension and accidental overloading. Low profile design; four
heavy-duty steel swivel casters provide easy maneuvering throughout the shop. Fits most
transmissions. This product is tested for reliability and safety to meet ASME PALD Standards.
TECHNICAL SPECIFICATIONS
Description
Item
46192
Capacity
1000 lbs.
Lifting Range
49-5/8 inch ~ 68-3/4 inch
Saddle Forward Tilt
14°
Saddle Backward Tilt
72°
Saddle Rightward Tilt
31°
Saddle Leftward Tilt
45°
Base L x W
22-1/4 x 21-3/8 inch
Safe Operating Temperature is between 40°F – 105°F (4°C – 41°C)