Product Manual

14
9. Before raising the vehicle double check and verify the saddle is centered and also has full contact
with the lifting point.
10. Squeeze air trigger to lift until saddle contacts load. (To stop air operation, simply release the grip on
the lift control valve.) Continue to pump the jack to lift the vehicle to the desired height.
11. After lifting, support the load with appropriately rated vehicle support stands before working on the
vehicle.
CAUTION: NEVER WIRE, CLAMP OR OTHERWISE DISABLE THE LIFT CONTROL VALVE TO
FUCTION BY ANY MEANS OTHER THAN BY USING THE OPERATOR'S HAND. USE THE HANDLE
PROVIDED WITH THIS PRODUCT OR AN AUTHORIZED REPLACEMENT HANDLE TO ENSURE
PROPER RELEASE VALVE OPERATION. DO NOT USE EXTENSIONS ON THE OPERATING
HANDLE