Product Manual

15
LOWERING
1. Raise load high enough to allow clearance for the jack stands to be removed, then carefully remove
jack stands.
2. Remove support stands.
3. Grasp the handle firmly.. Securely hold on to the jack handle so your hands do not slip and ensure
the release valve does not rapidly lower.
4. Carefully open the Release Valve by slowly turning the handle counterclockwise. (Do not allow
bystanders around the jack or under the load when lowering the jack.
5. After removing jack from under the vehicle，fully retract the jack to reduce ram exposure to rust and
contamination.
6. After removing jack from under the load, push ram and handle sleeve down to reduce exposure to
rust and contamination.
WARNING: USE EXTREME CAUTION WHEN LOWERING THE JACK. THE JACK HANDLE MAY
TURN RAPIDLY. OPENING THE RELEASE VALVE TOO FAST CAN CAUSE THE JACK TO LOWER
RAPIDLY. FAILURE TO HEED THESE WARNINGS COULD CAUSE SERIOUS INJURY OR DEATH.
CAUTION: Be sure all tools and personnel are clear before lowering load. Slowly open the
release valve! The more you turn the handle knob counterclockwise, the faster the load will come down.
Maintain control of the rate of speed at which the load lowers at all times！