000-LB. MOTORCYCLE LIFT TABLE OWNER’S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway product! For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This machine is designed for certain applications only. The distributor cannot be responsible for issues arising from modification.
LIFT TABLE USE AND CARE Do not modify the lift table in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the equipment. There are specific applications for which the lift table was designed. Always check of damaged or worn out parts before using the lift table. Broken parts will affect the lift table operation. Replace or repair damaged or worn parts immediately. Store idle lift table.
SAFETY MARKINGS WARNING: Study, understand, and follow all instructions before operating this device. Do not exceed rated capacity. Use only on hard, level surfaces. Center load on lift platform or if saddles are used, load saddles equally. If saddles are used, use as a matched pair only. Lift only those areas of the motorcycle specified by its manufacturer.
ASSEMBLY 1. Familiarize yourself with the lift. 2. Insert the lift handle onto the handle socket. 3. Mount the saddle brackets onto the platform, then tighten the locking screw on each saddle. Saddle Bracket Platform Lead Screw Locking screw 4. Make sure the saddle is correctly positioned. To prevent damage to the lift, do not move the lift while the handle is attached to the socket.. 5. Secure the handle in place inside onto handle socket. Without any weight on the lift.
OPERATION RAISING THE LIFT 1. Position the lift near desired lift point. 2. Rotate the lead screw handle to adjust and raise the lift. To prevent damage to the lift, do not move the lift while the handle is attached to the socket. 3. With-out any weight on the lift. Cycle the lift up and down several times to insure the lift is operating properly. 4. Before raising double check and verify the saddles are centered and also has full contact with the lifting point. 5. Grasp the handle firmly with both hands.
MAINTENANCE INSTRUCTIONS Maintain your lift table. It is recommended that the general condition of any lift table be examined before it is used. Keep your lift table in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel. If you use and maintain your equipment properly, it will give you many years of service. Follow the maintenance instructions carefully to keep your equipment in good working condition.
ASSEMBLY DIAGRAM PARTS LIST Index # 1 2 3 4 5 6 7 8 9 10 11 Description Bottom Platform Lifting Part Pulley Pulley Washer Screw Lead Screw Elastic Pin Support Part Top Platform Locking Screw Part No. TRE4101-001 TRE4101-002 TRE4101-003 TRE4101-004 TRE4101-005 TRE4101-006 TRE4101-007 TRE4101-008 TRE4101-009 TRE4101-010 TRE4101-011 Qty. 1 1 4 4 4 4 1 1 2 1 2 Safe Operating Temperature is between 40°F – 105°F (4°C - 41°C) REPLACEMENT PARTS For replacement parts Customer Service at 1-800-222-5381.
Limited Warranty Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
