Product Manual

5
ASSEMBLY
1. Familiarize yourself with the lift.
2. Insert the lift handle onto the handle socket.
3. Mount the saddle brackets onto the platform, then tighten the locking screw on each saddle.
4. Make sure the saddle is correctly positioned. To prevent damage to the lift, do not move the lift
while the handle is attached to the socket..
5. Secure the handle in place inside onto handle socket. Without any weight on the lift. Cycle the lift
up and down several times to insure the lift is operating properly.
BEFORE USE
1. Before using this product, read the owner's manual completely and familiarize yourself
thoroughly with the product and the hazards associated with its improper use.
2. Check that the lift operates smoothly before putting into service.
3. Inspect before each use. Do not use if bent, broken or cracked components are noted.
Saddle Bracket
Platform
Locking screw
Lead Screw